DOTRC11B (BKEDOM) LG Wall Oven - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Light Bulb - 120V 30W – Part Number: 6912W1Z004B
$24.95
In Stock
Air Duct Bracket – Part Number: 4810W1A151A
$24.15
In Stock
Air Duct Bracket
★★★★★
★★★★★
(1)
Part #4810W1A151A
This bracket holds the metal or plastic flapper that closes off the exhaust duct when the fan is not running and opens when the fan turns on. If the exhaust fan on your microwave does not appear to be working, the problem may be with the damper assembly. If the damper does not open and close easily, check for any damage to the bracket, and replace if it is damaged or faulty. This genuine OEM exhaust damper measures approximately 12 inches long by 5 inches wide.
Hardware Mounting Kit – Part Number: 3861W1A043C
$48.35
In Stock
Hardware Mounting Kit
Part #3861W1A043C
Micro Switch – Part Number: 6600W1K001D
$24.15
In Stock
Spring – Part Number: 4970WRA001B
$13.15
In Stock
Spring
Part #4970WRA001B
Screw,Taptite – Part Number: 1SBF0402418
$13.15
Special Order
Screw,Taptite
Part #1SBF0402418
Screw,Customized – Part Number: 4B70188C
$13.15
In Stock
Screw,Customized
Part #4B70188C
DAMPER – Part Number: 4900W1A001A
$13.15
On Order
DAMPER
Part #4900W1A001A
Door Panel - Black – Part Number: 3720W0D032B
$66.48
Special Order
Door Panel - Black
Part #3720W0D032B
SWITCH,MICRO – Part Number: 6600W1K001B
$24.15
Special Order
SWITCH,MICRO
Part #6600W1K001B
SCREW,TAPPING – Part Number: 1TTG0402618
$10.95
Special Order
SCREW,TAPPING
Part #1TTG0402618
Bracket,Capacitor – Part Number: 4810WRC002A
$18.95
Special Order
Bracket,Capacitor
Part #4810WRC002A

Common Symptoms of the DOTRC11B

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Broken door micro switch. (unit does not start heating)
37 of 68 people found this instruction helpful.
  • JAMES from BILLINGS, MT
  • Very Easy
  • 30 - 60 mins
  • Screw drivers
Unplug the unit before servicing. Need phillips screwdriver. Open door. Use step ladder to access and remove 2 small screws from top of the room air diffuser at top of unit. Slide diffuser slightly to the left to align the diffuser's plastic tab on the left side to rotate toward you. (The wires for the front control panel are at the far l eft side of this difuser, but difuser is slotted for easy removal). Once the difuser is removed you will see 1 screw at the top that secures the pannel cover on the left side of the unit. Remove screw and slide this panel slightly up and out. This exposes the plastic frame that holds the upper and lower door switches. To locate the door switches and observe how they work, close and open the door and watch the door (bayonets) open and close the micro switches. Do the (red) buttons on top of the switches move up and down when the door bayonets push and release? If the buttons do not "pop" up when opened the switch is defective. The switch frame is secured with 2 screws. Remove screws and rotate the unit out for easy access to the micro switch(s). The internal (spring?) on my unit that is suposed to allow the red (visible) button on top of the switch to "pop" up when the door is opened was broken. Carefully pry the switch outward while being careful to lift the plastic holder-piece that holds the switch in place. Be careful, there is a small pin on the frame, so rotate the switch OUT toward you while lifting (carefully) the plastic holder-piece (you will see it on top of the switch). You can use an ohm meter to test the continuity of the switches. But if the buttons don't "pop" they are defective. Replace switch and reassemble.
Was this helpful?
Thank you for voting!
Door sensor switch went bad. Microwave would not operate.
15 of 29 people found this instruction helpful.
  • Randall from ARCADIA, CA
  • A Bit Difficult
  • 1- 2 hours
  • Pliers, Screw drivers
Watched a couple of repair videos on Youtube by searching for the model number. Found out what to do in order not to get shocked by the powerful capacitor.
Ordered the two switches (To be sure, I could have ordered a third switch as suggested in the videos.)
Bought a tamper-proof star bit to get the cover off. Followed the dir ections to replace the switches. - I broke the harness and had to use some super glue, but it's all good. I should have removed the harness instead of trying to get a switch out while it was still in place.
It's all back together, and the wife is happy!!
Was this helpful?
Thank you for voting!
everything worked except it wouldnt cook
11 of 21 people found this instruction helpful.
  • Joseph from N VERSAILLES, PA
  • Very Easy
  • 30 - 60 mins
  • Screw drivers
tested all 3 of the door switche for continuity, the top switch was faulty, replaced it,for approx $4.00 and saved a $350 dollar microwave.
Was this helpful?
Thank you for voting!