DMT2420R Dacor Microwave - Overview

Diagrams for DMT2420R

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
SVC-TURN TABLE TRAY;66344,DMO2 – Part Number: DE81-08798A
No Longer Available
SVC-TURN TABLE TRAY;66344,DMO2
Part #DE81-08798A
SVC-OPEN LEVER;86824,PMOR3021B – Part Number: DE81-10108A
No Longer Available
SVC-OPEN LEVER;86824,PMOR3021B
Part #DE81-10108A
This is an open lever for a microwave. It allows the microwave door to open when prompted. When you push on your door latch lever, it contacts the door latch assembly and releases the hooks that lock the door shut, allowing the door to open. If your door will not open, you may need to replace the open lever. You will need to remove the microwave cover and possibly the control panel, depending on your model
SVC-LATCH HEAD;86785,PMOR3021B – Part Number: DE81-10099A
No Longer Available
SVC-LATCH HEAD;86785,PMOR3021B
Part #DE81-10099A
SVC-LATCH SPRING;86786,PMOR30B – Part Number: DE81-09672A
No Longer Available
SVC-LATCH SPRING;86786,PMOR30B
Part #DE81-09672A
Magnetron – Part Number: DE81-10242A
No Longer Available
Magnetron
Part #DE81-10242A
This is called a magnetron and it is to be used in your microwave. The purpose of this part is to generate energy and heat for your appliance. This piece is 6 inches long, 6 inches wide, and 5.5 inches thick. The most common reason for needing to change the magnetron is if your appliance is making loud noises and does not heat. Before making this repair, we recommend unplugging your microwave and letting it sit inactive for some time. Take precautions while making this installation as a microwave can hold a lethal electrical charge for extend periods of time, even when unplugged.
SVC-MONITOR SWITCH CT FUSE;668 – Part Number: DE81-04861A
No Longer Available
SVC-MONITOR SWITCH CT FUSE;668
Part #DE81-04861A
SVC-WAVEGUIDE COVER;66345,DMO2 – Part Number: DE81-08803A
No Longer Available
SVC-WAVEGUIDE COVER;66345,DMO2
Part #DE81-08803A
SVC-MICROSWITCH – Part Number: DE81-09913A
No Longer Available
SVC-MICROSWITCH
Part #DE81-09913A
SVC-HV RECT ASSEMBLY;66857,DMT – Part Number: DE81-09666A
No Longer Available
SVC-HV RECT ASSEMBLY;66857,DMT
Part #DE81-09666A
Turntable Motor – Part Number: DE81-08800A
No Longer Available
Turntable Motor
Part #DE81-08800A
DISCONTINUED – Part Number: 66859
No Longer Available
DISCONTINUED
Part #66859
Baseplate – Part Number: 66861
No Longer Available
Baseplate
Part #66861

Manuals & Care Guides for DMT2420R

Click to download

Common Symptoms of the DMT2420R

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Microwave was acting all crazy like my ex wife!
4 of 5 people found this instruction helpful.
  • Bradley from GREEN BAY, WI
  • Very Easy
  • More than 2 hours
It took more than 2 hours to do this extremely delicate surgical type procedure! First I had to run to buy beer and chips to make sure I had all the necessary supplies needed. I opened a beer and surveyed the job.I carefully removed the crappy old waveguide cover, and had another beer while opening the package of the new waveguide cover. I then installed the new waveguide and proceed to have a few more beers while I admired my work and the awesome new waveguide from Part-Select. Later I put it to the test and heated up some left over buffalo wings, had a couple more beers and went to bed a happy man with the piece of mind that my new waveguide was up for the job!! Thanks Part-Select!
Was this helpful?
Thank you for voting!
Microwave makes loud noise and dies not heat.
2 of 2 people found this instruction helpful.
  • ALVIN from BEND, OR
  • Easy
  • 30 - 60 mins
  • Screw drivers
Unplug. Remove hood. Ground capacitor. Photograph wiring. Remove magnetron. (2 wires, 4 screws). Replace and reassemble. Dispose of old unit. If you are ordering parts and are not into testing circuits order a new diode and difuser card as well. Replace all three.
Was this helpful?
Thank you for voting!
Turn table motor
2 of 4 people found this instruction helpful.
  • barb from dana point, CA
  • Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
Just take out the appliance from built in frame, if any, remove the glass turn table, disassemble the metal cover (no-tamper screws were a problem), flip it over, unscrew one screw from the motor, unplug the wires (keep track of the connections), install the new motor and wires, reaassemble with regular screws, and reinstall. No big deal.
Was this helpful?
Thank you for voting!