DLEX5680WE LG Dryer - Overview

The drum support roller for your dryer holds the drum in place while the drum turns on the support wheels. The drum roller is round with a bearing in the middle and measures approximately 3 inches in diameter. If the dryer is noisy, won’t tumble, or takes too long to dry, you might need to replace the support roller. It is recommended tha...Read moret you replace both rollers at once. The bearing inside this roller is self-lubricating, so no grease will be required. Please remember to disconnect the power to your appliance before starting your repair. This is a genuine OEM part.

It is used in dryers.

The moisture sensor, also known as a humidity sensor, works in conjunction with your dryer by helping determine the amount of moisture in the drum to reduce overdrying. If the timer doesn’t advance correctly, it is suggested to check the moisture sensor bar for damage. A damaged sensor can cause the automatic drying cycle to not work prop...Read moreerly and will need to be replaced. This is a genuine OEM part. Please remember to disconnect the power to the dryer before starting this repair.

The drive belt is made to wrap around the drum, working with the tension pulley to rotate the drum. If your dryer drum will not turn, then you may need to replace your belt. This drive belt is 1/4-inch wide with 4 ribs and 3 grooves. It is recommended to disconnect the power to your dryer before you start your repair. This drive belt is a genuine OEM part.

The lint filter sits in your dryer, and collects loose lint when the machine is operating. Sometimes the lint filter will become clogged or damaged, and in this case, you will need to replace your current lint filter with this part. The frame of this line filter is made of white plastic, and the filter is sold individually. To replace the filter, simply remove the old, damaged filter, and replace it with the new one.

This lint filter guide cover is a replacement component for select dryers, designed to support the lint filter assembly and help maintain efficient airflow during drying cycles. Made entirely of durable plastic, it measures approximately 16 inches wide and fits into the upper portion of the lint filter housing. This cover is one of three ...Read moreparts in the full lint filter assembly and does not include the filter or guide, which must be purchased separately. If the cover is cracked, chipped, or no longer fits securely, replacing it can help restore proper lint collection and dryer performance. Sold individually.

This thermistor is used in dryer

This light bulb provides interior illumination, making it easier to see contents or monitor operation. Designed to withstand heat and vibration, it restores visibility when the original bulb burns out or dims over time.