The drum support roller for your dryer holds the drum in place while the drum turns on the support wheels. The drum roller is round with a bearing in the middle and measures approximately 3 inches in ...
The lint filter sits in your dryer, and collects loose lint when the machine is operating. Sometimes the lint filter will become clogged or damaged, and in this case, you will need to replace your cur...
This lint filter guide cover is a replacement component for select dryers, designed to support the lint filter assembly and help maintain efficient airflow during drying cycles. Made entirely of durab...
Looking to extend the lifespan of your LG electric dryer? Our authentic LG Idle Pulley could be the missing piece you need! This little thing plays a big role in keeping your dryer working smoothly an...
This plastic adjustable dryer leg is used to support the weight and adjust the height of your dryer to keep it level. To install the leg, tip the dryer back and screw it into the bottom of your dryer ...
Take a look at this essential LG Dryer Safety Switch Assembly. A don't-miss fixture for your LG Dryer. This is more than just a part, it's a safeguard for you. If your dryer's door springs open, this ...
$56.87
In Stock
Questions And Answers for DLE7300WE
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
April 1, 2023
Whare is the LG dryer light located
For model number DLE7300WE
Hello John, Thank you for your inquiry. The led lamp is located on the inside of the dryer drum, but to remove it, you would need to remove the top and control panel and then access the lamp harness, and then push it through the drum. We hope this helps.
No power. Fixed it once with a hard reset
(Unplugged the dryer and pushed the power button for 10 seconds, then pushed the start button for 10 seconds).
Hard reset is not working now. Dryer is completely dead. Power supply is good.
For model number DLE7300WE
Hello Milo, thank you for reaching out. It appears that your dryer may have a damaged control board. We suggest you replace the control board, part number PS16732633, to fix the issue. Good luck with this repair!
Was this helpful?
Thank you for voting!
Leanne
March 8, 2024
Looking for dryer lint filter
For model number DLE7300WE
Hello Leanne, thank you for reaching out. The lint filter you are looking for is part number PS3527575. Customer service is available 7 days a week if you need help placing an order!
The panel lights up “flow sense d 80”
What is wrong with?
For model number DLE7300WE
Hello James, thank you for getting in touch. The "flow sense d80" error on an LG dryer signals a major obstruction in the exhaust vent, limiting airflow by 80-90%. This suggests that the dryer is detecting a blockage, probably caused by lint accumulation, and the system is intended to avert possible dangers such as overheating or fire. Disconnect the dryer vent from both the back of the dryer and the wall. Use a brush to eliminate any lint or debris from the vent. Inspect and clean the exhaust port of the dryer as well as the wall opening where the vent attaches. Make sure the vent is securely reattached, avoiding any kinks or sharp bends that might impede airflow. We hope this helps.
Was this helpful?
Thank you for voting!
Karen
March 27, 2023
cl flashing on screen. what does that mean.
For model number DLE7300WE
Hi Karen, thank you for reaching out. CL code means that the child lock feature is active. Press and hold the child lock or control lock button for three seconds to deactivate the child lock. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Had to replace front drum support rollers. Removed screws underneath top in back that held bracket that keeps top in place. Slid top towards rear and lifted up. Removed 4 screws that hold plastic front panel in place (inside..2 on each corner) Unplugged front panel electric plugs to remove panel. Opened door..removed 2 screws at bottom of door opening. Removed screws on top of front panel. Unplugged door switch plug. Removed front panel. Removed right front roller with 9/16th wrench for nut. Adjustable for back of stud. Lifted up on drum to get roller out. Reversed to install. Left roller a bit harder to get to stud. Removed and installed same as right side. Did not attempt to replace rear rollers. Have them if needed but very much more involved to replace.
I actually went to mr fix it on u tube. Great instruction on how to take dryer apart. First I unplugged the dryer. I found I could reach the heating system by removing the lint tube in the back of the dryer. I put my I phone with the light on inside the back of the dryer and tested the connections to see if all were working. The thermal fuse was not working. I removed the two wires , red on top and white on the bottom. Then used a small Phillips screwdriver to remove the two mounting screws and removed the fuse. I then used a vacuum to clear any lint from the back of the dryer and inside the dryer. This took me about an hour and a half. I did it this way because I did not want to disassemble the entire dryer to get to the components. I received the fuse in 3 days and tested it. It was fine. I then put it in the dryer screwed it in place, connected the wires. Replaced the lint tube. This took about 10 minutes. Dryer is running great.
Found disassembly video and watched several times. Suspected that one of the drum wheels had seized up. Found extreme volume of lint and hair inside unit as well as a dryer sheet melted on top of heating unit. Front left drum wheel was worn down from lint and hair jamming its movement. Video made it easy, not a really complicated piece of machinery. Replaced all 4 wheels due to normal wear on other three. Wanted to be sure drum evenly balanced on all 4. Parts came quickly and were easy to install. My sister and I did this together. Would not recommend doing it alone. Took time to vac and wipe down entire unit. Now it runs so quiet we have to look to see if it is operating. Got a brand new machine out of it, saved a couple of hundred dollars in repair bills, and found 11 cents inside the machine. For your own piece of mind, if you have had your dryer for several years, you need to open it up and clean it out. Its not hard... added note, we are both in our 60's... so if we can do it so can you.... Such a feeling of accomplishment, can't buy that in a store....
