DH3006 Dacor Range Hood - Overview

Diagrams for DH3006

See every part. Know exactly what you need.

Parts for the DH3006

View More

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Lamp Halogen 75W – Part Number: DE81-08661A
$98.67
On Order
Lamp Halogen 75W
Part #DE81-08661A
Also known as a light bulb. This bulb is used for ranges.
Screw Wafer – Part Number: DE81-02250A
No Longer Available
Screw Wafer
Part #DE81-02250A
Lamp Trim – Part Number: DE81-08258A
No Longer Available
Lamp Trim
Part #DE81-08258A
This range hood trim lamp assembly provides bright, reliable lighting for the cooking area beneath the hood, replacing a light that is dim, flickering, or no longer working. Designed for a precise fit on select ventilation models, it combines the lamp and trim into a single, easy-to-install unit with a clean, modern appearance. It helps restore proper visibility and maintains the overall look of the appliance. Power should always be disconnected before installation.
Read less
Filter Assembly – Part Number: DE81-08660A
$128.38
Special Order
Filter Assembly
Part #DE81-08660A
Selco Knob – Part Number: DE81-05998A
No Longer Available
Selco Knob
Part #DE81-05998A
SVC-LIGHT DIMMER CAP;36511,DH3006 – Part Number: DE81-08662A
No Longer Available
Lamp Dimmer – Part Number: DE81-09033A
No Longer Available
Lamp Dimmer
Part #DE81-09033A
SVC-SCREW PHIL WAFER;83263,#8X3/8,DCT305 – Part Number: DE81-02331A
No Longer Available
SVC-SCREW;83667,"#10-32X1/2,410 SS",DH30 – Part Number: DE81-02048A
No Longer Available
SVC-SCREW WELD;83137,"#8-32 X1/2,ST",DH3 – Part Number: DE81-02080A
No Longer Available
SVC-TRIM EDGE;62350,1/4X1/32X.218,DH3006 – Part Number: DE81-02083A
No Longer Available
SVC-SCREW WELD;83204,"8-32X3/8,SST",DH30 – Part Number: DE81-02105A
No Longer Available
View More
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
The rheostat controlled light failed
2 of 2 people found this instruction helpful.
  • Barbara from HOUSTON, TX
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
As I removed the broken part, I marked each wire indicating the color of the wire nut I would use for the installation of the replacement switch. With the new part, I connected the 2 yellow marked wires to the yellow supply wire. (It was "hot" - surprise!!) I connected 1 orange marked wire to one of the 2 corresponding orange wire. I then tested the switch and realized I had connected the light wire to the vent supply wire. I switched to the light supply wire, connected the fan control correctly. Life is good in my kitchen: cool and bright!
Read less
Was this helpful?
Thank you for voting!
Two striped out screw heads
3 of 10 people found this instruction helpful.
  • David from MCKINNEY, TX
  • Easy
  • Less than 15 mins
Purchased a screw extractor set from the local Ace Hardware (SpeedOut). Be sure and carefully follow the screw extractor instructions as written (counterclockwise turn). Removed old screws and replaced them with new screws supplied by PartSelect.
Was this helpful?
Thank you for voting!
View More