DF241760 Gaggenau Dishwasher - Overview

Models starting with DF241760

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
SEALING – Part Number: 12054183
$23.53
In Stock
SEALING
★★★★★
★★★★★
(35)
Part #12054183
This dishwasher door gasket creates a watertight seal between the door and the tub, preventing leaks during wash cycles. Made from flexible black rubber, it fits securely along the edge of the door to keep water contained inside the appliance. Over time, the seal may wear out or become damaged, leading to visible leaks or moisture around the door. If you notice water escaping during operation, replacing the gasket can restore proper sealing and protect your kitchen from water damage.
Lower Rack Wheel with Clip – Part Number: 00165314
$25.87
In Stock
Water Inlet Valve – Part Number: 00607335
$107.70
In Stock
Water Inlet Valve
★★★★★
★★★★★
(33)
Part #00607335
This is a replacement water inlet valve for your washer. The water inlet valve in your washer connects to the water source and solenoid wires, and ensures the tub has the right amount of water entering it. If your washing machine continues to fill after it is full, or if it fills slowly, you may need to replace this valve. A leaking washer could also be an indicator of a damaged water inlet valve. Before you begin this repair, be sure to disconnect the water and power sources from your washer. This part is sold individually.
Lower Door Seal – Part Number: 00432490
$60.18
In Stock
Drain Pump – Part Number: 00642239
$235.00
In Stock
Drain Pump
★★★★★
★★★★★
(21)
Part #00642239
If your dishwasher isn’t draining or cleaning well, this drain pump could be the issue. It helps move water out of the tub during the cycle and fits many Bosch, Thermador, and Gaggenau models. Signs it’s failing include leftover water, leaks, or strange noises. Replacing it can get your dishwasher working like new again. Sold individually.
Water Inlet Valve – Part Number: 00425458
$104.34
In Stock
Water Inlet Valve
★★★★★
★★★★★
(18)
Part #00425458
If your dishwasher isn’t filling with water, running dry, or leaking, the water inlet valve might be the issue. This part controls how much water flows into your dishwasher during each cycle. It’s designed to open and close at the right times, keeping everything running smoothly. When it wears out, you might notice poor cleaning or puddles under your appliance. Swapping it out is a smart fix—and with a little guidance from your owner's manual, it’s usually a straightforward job.
LID – Part Number: 00166623
$25.99
In Stock
Check Valve – Part Number: 00165262
$24.16
In Stock
Dishwasher Tripping Device – Part Number: 00166630
$29.28
In Stock
Dishwasher Tripping Device
★★★★★
★★★★★
(4)
Part #00166630
Ensure proper detergent release during wash cycles with this genuine latch kit, designed to open the detergent cup at the right time and prevent premature opening. The kit includes a latch, spring, and seal, providing a complete solution for restoring smooth operation. Common signs that replacement is needed include the detergent cup popping open unexpectedly, difficulty closing, or detergent leakage. Installing this part helps maintain optimal cleaning performance and prevents wash cycle interruptions.
Drain Hose – Part Number: 00298564
$55.67
In Stock
DOOR LATCH – Part Number: 00438026
$112.93
In Stock
DOOR LATCH
★★★★★
★★★★★
(8)
Part #00438026
This dishwasher door latch helps keep the door shut tight during cycles, preventing leaks and making sure everything runs smoothly. It also tells the dishwasher when the door is properly closed. Easy to install and built to last, it’s a great fix if your door isn’t staying closed or your dishwasher won’t start.
PANEL-BASE – Part Number: 00668687
$98.41
In Stock
PANEL-BASE
Part #00668687
Give your dishwasher a clean, polished look again with this replacement toe kick panel. It covers the bottom front of your appliance, protecting the internal parts from dust and moisture while hiding wires and components. Made for select Bosch, Thermador, and Gaggenau models, this black panel is a simple way to refresh your dishwasher’s appearance—especially if the old one is damaged or missing. Just check your model to make sure it fits!

Common Symptoms of models starting with DF241760

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
My dishwasher was not draining
21 of 34 people found this instruction helpful.
  • Karen from CRESTON, IA
  • Easy
  • 15 - 30 mins
  • Screw drivers
With the help of You Tube, this 50 year old Mom got the job done. Not that complicated if you watch the step by step instructions on the Appliance Pro video. My repairman and husband were both determined to just buy a new one but this 20 year old dishwashing genius was just in need of a little repair. Only need a screwdriver, and sli ghtly confusing as wires hook on a little different on new pumps. I suggest watching video the whole way through and then playing it step by step as you do the repair. Worked great for me. Thanks.
Was this helpful?
Thank you for voting!
dishwasher not draining
14 of 20 people found this instruction helpful.
  • Bruce from MOUNT VERNON, WA
  • Very Easy
  • Less than 15 mins
  • Screw drivers
I used a wet vac to remove the water from the dishwasher. remove cover and filter/strainer from bottom of dishwasher. remove screw which allows you to lift the plastic piece to access check valve. Original check valve looked like new , I installed new check valve re installed parts . Job done and issue resolved .
Was this helpful?
Thank you for voting!
BROKEN CORD, PART OF DOOR COUNTERWEIGHT
7 of 7 people found this instruction helpful.
  • Bill from EAST JORDAN, MI
  • Difficult
  • More than 2 hours
  • Screw drivers, Wrench set
REMOVED DISHWASHER FROM CABINET. DETACHED BASE FROM BODY OF THE DISHWASHER. INSTALLED NEW CORD, REATTACHED BASE TO BODY OF DISHWASHER AND REINSTALLED IN CABINET. OPINION: THIS IS A LENGTHY REPAIR AND UNNECESSARY ONE. THE CORD IS PART OF THE DOOR COUNTERWEIGHT AND SUBJECT TO TENSION EVERY TIME THE DOOR IS OPENED, AS WELL AS POTENTIAL CHAF FING DUE TO PROXIMITY TO VARIOUS METAL PARTS, AND VIBRATION. THE CORD SHOULD BE MADE OF STRONGER MATERIAL AND ARMORED OR ALLOWED MORE CLEARANCE. BOSCH SHOULD FIX TO LAST THE LIFE OF THE DISHWASHER.
Was this helpful?
Thank you for voting!