This idler assembly is for dryers and includes the idler arm and the idler pulley that maintains tension on the drive belt, allowing the belt to turn.
Disconnect the power before installing this part...
Ask our experts a question about this model and we'll get back to you as soon as possible!
13 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Becky
February 18, 2020
My dryer just stopped working. The switch appears to work. How can i troubleshoot before calling a repair person
For model number DCVH480EK0WW
Hello Becky, Thank you for the question. In order to trouble shoot we will need a bit more details. Is there power to the appliance but there is just no heat or is it heating but no tumble? Is it getting hot but not hot enough? The more details on the symptoms the better. Please submit a new question if you have any follow ups. We are looking forward to hearing from you.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Justin
July 19, 2021
Hi my dryer has power and the display works and timer for various settings works but the dryer does not tumble or heat up, after pressing start, there is no noise. But the clock on display does count down the length of time for selected cycle. Thanks for your help
For model number DCVH480EK0WW
Hello Justin, Thank you for the question. We suggest checking the Belt Switch. If you press and hold the Start switch in and the dryer tumbles and heats as long as the start switch is held in, the Belt Switch will need to be replaced. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Richard
February 2, 2023
My dryer runs for about 2 or 3 minutes then shuts off you can't turn it back on you got to wait about a minute then you can hit the power button that comes back on go to press to dry and then does the same thing I checked everything out cleaned all Lynn out took the van off made sure it was all clean nothing clogged up I cleaned the moist strips inside with rubbing alcohol still nothing same miss you
For model number DCVH480EK0WW
Hi Richard, thank you for contacting us. We have searched and found the following parts to fix the issue: the control assembly, part number PS2374278, and the thermostat, part number PS3417669. We hope this information helps! Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
Hello Dee, thank you for your inquiry. According to our research, over time, laundry detergent and fabric softener residue can build up and clog your lint screen, part number PS3493633. A thorough clean every 3 months will remove stubborn build-up and ensure your filter is working efficiently. Glad to be of assistance!
Dryer runs fine on any setting. The problem is that it only warms up and when it is running on moisture sensor it runs forever and the cloths don’t dry. The cloths only gets warm not hot. Suggestions?
For model number DCVH480EK0WW
Hi Greg, thank you for reaching out. Based on the description that you have provided, we would recommend checking the thermistor assembly, part number PS3417670, to fix the issue. It attaches on the blower housing, and monitors and helps regulate the temperature inside the dryer. We hope that helps!
I used the similar screws of my own for temporary until I found parts from PartSelect.com to buy. After I ordered and when it arrives, I just simply replace the missing screws and screwed them in to get LCD TV and LCD TV Stand together firmly without a problem which is much better than the wrong screws I used for temporary.
