DA250A Porter Cable Nailer - Overview

This is an authentic OEM sourced component which is specially designed for Porter Cable staplers and nailers. It is an identical replacement for a missing or faulty rolled pin that was originally installed on a new unit, please make sure to check the appropriate diagrams of your model for the correct location and application of this hardw...Read moreare. Keep in mind this high-quality item is made of durable metal and is sold individually.

This unthreaded trigger valve assembly is a genuine OEM assembly used in nailers. It includes the trigger valve, 1 rubber washer, and 3 roll pins. The trigger valve controls the flow of air in the tool which drives the piston and creates the nailing action. If the valve becomes stuck, the seals wear down, or the trigger breaks the nailer ...Read morewill leak air, struggle to fire, or not fire at all. Begin the repair by switching off the tool and using a push pin to remove the trigger. Remove the roll pins that secure the trigger valve and pull the trigger valve out of the housing. Insert the new valve into the housing, install the pins to hold it in place, and secure the stay pin with the washer.

This trigger is a genuine replacement part sourced for use in Porter Cable nailers. This is a single sequential trigger that replaces bottom fire (AKA contact) trigger. Single sequential triggers greatly reduce injury. They cannot be used for bump/bounce nailing since trigger must be released and then reactivated in order to fire. One (1)...Read more trigger and its two (2) pins are included. Note that both pins can be purchased separately as part # 883945 (smaller rolled pin) and part # 883884 (larger rolled pin).