D55167 (Type 4) DeWALT Compressor - Overview
Sections of the D55167
[Viewing 2 of 2]
Keep searches simple, eg. "belt" or "pump".
Ball Valve
PartSelect #: PS10187952
Manufacturer #: N072023
This genuine OEM replacement drain valve is designed for use with a variety of DeWalt air compressors. Made from durable metal, it allows you to easily open or close the valve with just a quarter turn...
$18.71
In Stock
Questions And Answers for D55167
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the D55167
[Viewing 2 of 2]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Can't find this special screw used on many housings etc
Actually don't like using Torx bits because they are hard to center deep in the channel. I had misplaced these forcing me to order replacements.
My plan is to insert Torx bits before screwing in and using jb weld to secure the bit to the screw, giving me a hex head. Can't find this special screw with a hex head. This screw is called AGC-408 by craftsman.
My plan is to insert Torx bits before screwing in and using jb weld to secure the bit to the screw, giving me a hex head. Can't find this special screw with a hex head. This screw is called AGC-408 by craftsman.
Parts Used:
-
Tim from Tucson, AZ
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
4 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken ground on original plug
Removed cover & old cord.
Replaced with new cord & replaced cover.
Works perfect.
Replaced with new cord & replaced cover.
Works perfect.
Parts Used:
-
Debra from PRESCOTT VLY, AZ
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Older compressor runs but no longer builds pressure
After replacing the piston, cylinder sleeve and O-rings, the old compressor works like a champ. The hardest part was getting the nut loose holding the piston & bearing in place. Two socket wrenches and a big hammer was able to break the nut loose and get it off.
Parts Used:
-
Cary from SAGLE, ID
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!