D512-04 (Type 100) DeWALT Hammer Drill - Overview

The chuck attaches to the gear case and is made of metal. The chuck & key are sold together as a set. These are genuine Porter Cable and DeWALT parts sourced directly from the manufacturer for use in drills. Over time these parts may break and will need to be replaced.

It is an authentic item that is supplied directly from the original manufacturer for use with DeWALT and Black and Decker equipment. This is the special spring cover for bearings utilized on the tools. It provides an identical replacement for a missing or a damaged hardware that was installed on a new unit. To ensure the correct applicati...Read moreon of this component please make sure to refer to the owners manual and the appropriate diagram of your model. Note, one high-quality bearing cover is included.

Genuine DeWalt replacement part Includes 1 Carbon Brush with wire lead attached. • Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • New brushes can restore a motor's electric braking Carbon motor brushes are one of the most commonly replaced power tool components. ...Read more• Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. • Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. • A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. • When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

This genuine manufacturer-supplied part is sourced from the original manufacturer to be used with DeWALT and Black and Decker hammer drills. The metal depth gauge connects to the auxiliary handle and is used to indicate the depth of the hole created by the drill. It is sold as an individual item. Replacing it is a simple task that does no...Read moret require any special tools. Check the owner's manual for your model to ensure the correct application.

This connecting ball is an authentic manufacturer replacement part used in various power tools. It is a stainless-steel ball that provides a pivot point that allows the attached components to move back and forth smoothly during use. If the connecting ball falls off or becomes loose, worn out, or damaged, the equipment will become unstable or unable to move at all.

This holder is sourced from the original manufacturer for use in hammer drills. It is yellow in color, and measures 7 inches in length. The holder is responsible for holding the chuck key when it is not in use. The holder fits onto the body of the drill and ensures that the chuck key is easily accessible and safely stored. Replace the hol...Read moreder if it is lost, damaged, or unable to hold the key. The holder and chuck key are sold separately.

This is an original part sourced directly from DeWalt. This grease was designed for use with the equipment listed below and helps to lubricate the system. This extends the life of the tool and protects parts from usual wear by allowing for easy movement. This item is sold individually.