The door hinge cable works in conjunction with the dishwasher door by connecting the door hinge to the door spring and helping to support and balance the weight of the door as you open and close it. I...
$26.95
In Stock
Order within the next 4 hrs and your part ships today!
The dishwasher roller assembly connects to the dishrack, and is located in the lower level of the dishwasher. It allows the dishrack to easily slide in and out. If the lower rack keeps falling off the...
$17.44
In Stock
Order within the next 4 hrs and your part ships today!
If your dishwasher is leaking or not cleaning as well as it used to, the door gasket might be the culprit. This flexible rubber seal fits around the tub and keeps water and steam inside during each cy...
$82.48
In Stock
Order within the next 4 hrs and your part ships today!
This flexible, corrugated drain hose assembly is designed to efficiently channel wastewater from your dishwasher to the household drainage system. Installed at the rear of the unit, it connects the di...
$141.30
In Stock
Order within the next 4 hrs and your part ships today!
This dishrack roller assembly is designed to facilitate smooth movement of the dishwasher rack, allowing it to glide in and out with ease. Engineered for durability, it attaches securely to the rack a...
$22.95
In Stock
Order within the next 4 hrs and your part ships today!
This part is the replacement inlet valve for your dishwasher. It is approximately 4-1/2 inches by 3-1/2 inches. The water inlet valve in your dishwasher connects to the water source and solenoid wire...
$125.86
In Stock
Order within the next 4 hrs and your part ships today!
If your dishwasher won’t start or is leaking during a cycle, the door latch might be the problem. This genuine LG latch assembly keeps the door closed tight, helping prevent water from escaping and ma...
$104.96
In Stock
Order within the next 4 hrs and your part ships today!
Your LG dishwasher deserves the best support, and that's what our Genuine OEM Mounting Bracket Assembly aims to provide. This isn't just any accessory, it's a critical component custom-made by LG for ...
$62.01
In Stock
Order within the next 4 hrs and your part ships today!
Having trouble with your LG dishwasher? Try our high-quality dispenser assembly. This isn't just any part'it's a genuine LG OEM, so it has the same great quality and precise specs as the original piec...
$166.22
In Stock
Order within the next 4 hrs and your part ships today!
This genuine sump and pump motor assembly is a key component for efficient dishwashing, collecting water from the bottom of the dishwasher and pumping it through the spray arms for powerful cleaning. ...
$566.67
In Stock
Order within the next 4 hrs and your part ships today!
Questions And Answers for D1471DB1
Be the first to ask our experts a question about this model!
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Simple, removed screws securing machine in the cabinet, then pull the unit out of the cabinet space about 10 inches. Springs are accessible within this extension. You need strong hands to extend the springs and attach them. Once attached, push machine back in place and re-install the anchor screws. In my situation, only one spring was broken, so the attached side revealed the correct slot to place the hook on the top position, the bottom position has a plastic lead for the spring, and that lead is attached to a rope to the door hinge. Note: Replace BOTH springs, even if only one is broken.
The inside gasket deteriorates over time - However replacement is easy. the main thing you have to remember is after you remove the old gasket, install the new one starting at the middle top of the tub and work your way down both sides. Also, don't push the gasket all the way in...only enough to hold in place. When you close the door the gasket will form a better seal around the door.
Turn off the power at breaker box. Disconnect the power at dishwasher since I needed to pull the unit all the way out of the cabinet to get to screws on the back side for this model. Find and remove the screws to the cover. Remove cover. In my case, the rope on the connector assembly had snapped. I replaced spring and connector identically to functioning side. Did need a pair of pliers to provide enough tension on spring to install. Reconnected cover and power and moved back into the cabinet. Easy repair and my wife wondered why I hadn't done it sooner.
