CVE28DM5NCS5 General Electric Refrigerator - Overview
Sections of the CVE28DM5NCS5
[Viewing 13 of 13]
Keep searches simple, eg. "belt" or "pump".
FILTER ASM XWFE
PartSelect #: PS16542726
Manufacturer #: WR01F04788
This water filter assembly helps reduce contaminants to improve water clarity and taste. Clean filtration protects internal components and enhances user satisfaction. Replacing the filter assembly res...
$127.31
In Stock
Order within the next 9 hrs and your part ships today!
Screw
PartSelect #: PS294660
Manufacturer #: WR1X1850
This screw is sold individually.
$13.95
Special Order
Common Symptoms of the CVE28DM5NCS5
[Viewing 2 of 2]Ice maker not making ice
Fixed by
these parts
these parts
Show All
Ice maker won’t dispense ice
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Was not making ice
Unpluged refrigerator, Removed 1 screw, removed cover, unplugged 2 wiring harnesses, removed second screw in icemaker lifted up icemaker, put new icemaker in pulled down to catch in hooks.installed screw in icemaker, Reconnect 2 wiring harnesses, put wiring harnesses into cutout installed cover, put screw into cover. Plugged refrigerator back in set up icemaker by morning the bucket was full of ice.
Parts Used:
-
Gary from Suffolk, VA
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
4 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
freezer temperature was warm, but freezer evaporator frozen
unplugged the electrical connection from the wall, took out the top and bottom shelves from the freezer (freezer located in the lower part of fridge)
took out the freezer door by unscrewing 4 screws (2 on the right 2 on the left) unscrew 2 screws on the back panel, unplugged the fan cables to uncover the evaporator, disconnected the thermistor, cut the wire about 1/2 inch, unhooked and unplugged the defrost heater, unscrew 1 screw.
with 2 Splice Lock Wire Terminals connected the new thermistor with the old thermistor wires and placed it back to the evaporator.
placed the new defrost heater to the bottom of the evaporator, screwed 1 screw back and plugged it back.
took out the freezer door by unscrewing 4 screws (2 on the right 2 on the left) unscrew 2 screws on the back panel, unplugged the fan cables to uncover the evaporator, disconnected the thermistor, cut the wire about 1/2 inch, unhooked and unplugged the defrost heater, unscrew 1 screw.
with 2 Splice Lock Wire Terminals connected the new thermistor with the old thermistor wires and placed it back to the evaporator.
placed the new defrost heater to the bottom of the evaporator, screwed 1 screw back and plugged it back.
Parts Used:
-
Generoso from Ocala, FL
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wasn't making ice
-
TIMOTHY from SPRINGVALE, ME
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
5 of 17 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!