This motor delivers consistent mechanical power to support smooth and efficient operation. Stable performance helps reduce strain on connected components. Replacing a failing motor restores reliable o...
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Norma
November 23, 2025
I need a new agitator/base plate mwsb10276
For model number CTW41N1AW
Hello Norma, thank you for getting in touch. According to our research, the baseplate assembly, part number PS18167556, is compatible with your model number. We hope this helps.
2 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Alice Krause
March 9, 2026
Does the lid come by its self. My lid had crumbled at the hinge on the side opposite the controls
For model number CTW41N1AW
Hi Alice, thank you for contacting us. Yes, the top cover assembly for your model is part number PS18167586. We hope this is what you were looking for!
1 personfound this helpful.
Was this helpful?
Thank you for voting!
Mike
March 11, 2026
The warm water side will keep adding water during cycle.
For model number CTW41N1AW
Hello Mike, thank you for reaching out. According to our research, the hot water inlet valve is the likely cause because its internal solenoid has either failed or is stuck open due to mineral buildup. Replacing it might help fix the issue. The part number is PS18188504. We hope this helps!
Was this helpful?
Thank you for voting!
Michael
June 27, 2026
In this model and make of clothes washers there's an arm that is controled by an electric solenoid that wraps around the shaft at the bottom of the gear assembly looks as if it is either a brake or a shiting arm on the bottom side of the machine and wraps about half way around the tun shaft. This lever or arm is broken on the washer but seems to have enough left to actuate what it is supposed to operate; however, the tub doesn't seem to spin as fast as it should because of the missing portion of tyhe arm.
For model number CTW41N1AW
Hello Michael, thank you for getting in touch. The part you are referring to is the retractor assembly, part number PS18188455. You will need to replace it to fix the issue. The missing portion of this arm prevents the clutch or brake mechanism from fully disengaging. As a result, the machine experiences partial drag on the tub during the spin cycle. This friction limits the spin RPM, leaving clothes excessively wet. We hope this helps.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
