This 40-Watt light bulb is sold individually and is a genuine OEM replacement option for your home appliances. It is specially designed to withstand extreme temperatures, so this bulb is compatible wi...
The rubber bumper sits between the burner and the range itself to ensure the burners do not scrape the stove top. This OEM replacement bumper is sourced directly from the manufacturer, and is sold individually.
This part is the replacement light socket for your oven. The oven light socket provides power to the light, and at the same time holds the light bulb in place.
This haliant burner element is a gneuine OEM replacement part for your stove. This element is 8 inches in diameter. The element lies underneath the stovetop, and will need to be replaced if it stops h...
This switch controls the stove top surface burner.
$128.05
Special Order
Questions And Answers for CS980SN1SS
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Owen
December 6, 2022
On the panel the 2 switch does not turn on the burner
For model number CS980SN1SS
Hello Owen, thank you for contacting us. If the infinite switch is not turning the burner on, you will need to replace it. The part number for the compatible surface burner switch is PS2339825. If you require assistance to place an order, please contact customer service. We hope that helps!
The stem that connects the knob to the stove broke off and needs replacing
For model number CS980SN1SS
Hello Suzette, thank you for contacting us. The stem come as a part of the knob. Your model comes with 6 knobs. The part numbers are:
PS2353383 for the left front and right front element, PS2353385 for the right rear element, PS2353382 for the left rear element, PS2353384 center element, and PS2339713 is for the lower oven. We hope this information is useful!
First I slid the stove out and unpluged it, then removed two screws,slid out element, disconected two wires, slid new element in to place, pluged two wires in ,put into place and installed two screws, pluged stove back in, and turned on to try. Works perfect.
1)Turn off power to stove 2)remove 2 bolts holding heating element 3)pull element out of the back of the oven about 8" so that the wire connects is visable 4)pull wire clips off of heating element and remove element from the oven 5)put wire clips on the new heating element 6)push new heating element back into the holes in the back of the oven 7)screw botls back into the oven holding the heating element in place 8)Turn power back on
Repair was very simple. Removed 2 screws under the cooktop, tilt the cooktop back, unplug 4 wires from 8" burner, remove two screws holding retaining clips, install new burner in reverse order. Very simple!