CRCL3630ZWW-1 General Electric Range - Instructions

noreen from torrington, CT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

aged burner bowls

I just removed the range elements and old bowls, placed the new bowls into the range top, and inserted the heating elements. What surprised me was the quickness in filling the order. I had the new parts the next day! Great!

Parts Used:

Louis from Sandwich, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

bottom trim had rusted, so we needed new piece

Removed oven door (made sure hinges were locked open and stayed open). Remove part on top of trim, removed rusted trim and replaced with new trim. Replaced part on top of trim and screwed all back together. Put oven door back on and unlocked hinges. It was easier than the trial run (when I hadn't realized that the hinges weren't locked open!)

Parts Used:

Robin from Apple Valley, MN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The trim piece on the bottom of the door was rusted making the unit look really dirty and used.

It was pretty simple. Just remove the door as the bottom piece holds all the parts together. Place on table top and remove old trim. Install new trim and install door. The only difficult part was the trim had a space for the glass door front. I opened up the space so that the glass would seat easier. Went together real easy. Stove looks like it's brand new.

Parts Used:

Glenn from West Melbourne, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

replaced broken oven door handle

On a 18 year old electric GE range: amazing not the exact handle but it does fit perfectly and looks great. If your somewhat handy this is very easy and can be completed in less than a half hour. Save the screws from the old handle, they can be used again.

Parts Used:

Door Handle

John from BOCA RATON, FL
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Part rusted over time...22 years.

Unscrewed eight screws. Removed rusted part. Cleaned area with Windex. Replaced new part.

Parts Used:

Jeannene from HUNTINGTON, TX
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

just needed new GE burner bowls

Only instructions I have has nothing to do with installation. But I'd like to suggest that you find a better shipping method. Placed my order on Feb. 7, received message later same day that it'd shipped. I didn't receive it until Feb. 16th -- very poor delivery service.

Parts Used:

Jacqueline from E WENATCHEE, WA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Bottom trim piece on 24 year old stove had rusted. Replace trim piece was still available.

Very simple. Lift oven door off brackets and set on floor. Remove sheet metal screws holding on existing trim piece, Clean area beneath trim.
Put new trim piece on, don't tighten any of the screws until all have been started as some adjustment is needed to align the holes for the screws.

Parts Used:

Donald from FAYETTEVILLE, NY
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

rusted trim strip

remove screws, re-install screws

Parts Used:

Larry from Sarasota, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set

3 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

bottom trim had rusted out from water build-up

disassembled bottom trim on oven door.cleaned area of excess rust and installed trim piece.

Parts Used:

john from buford, GA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set

3 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Old burner bowl needed to be replaced

Took out the old & put in the new one-Done!

Parts Used:

bonnie from N KINGSTOWN, RI
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

End cap broke on handle

Opened oven door removed screw and broken end cap. Replaced with new end cap and put handle back on

Parts Used:

End Cap - White - Right Side

Jim from NORTH HAVEN, CT
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

My burner trays were worn out and I needed new ones

I simply pulled the old ones out and replaced them with the new ones. It looks so much better and cleanes up well.

Parts Used:

Mary Jane from La Junta, CO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Obsolete appliance parts missing

Thank goodness for PartSelect.com
When we moved into our home the microwave and electric range are obsolete appliances and were missing parts. PartSelect.com has pictures of parts on one inch grid pattern so I was able to select the hard to find parts that would fit perfectly and they did.

Parts Used: