CPFC2TV3525VP (Type 3) Porter Cable Compressor - Overview

Diagrams for CPFC2TV3525VP

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Label Hot Surface Tr – Part Number: N008806
No Longer Available
Label Hot Surface Tr
Part #N008806
Kit Connecting Rod – Part Number: A02743
No Longer Available
Kit Connecting Rod
Part #A02743
Tube – Part Number: A19122
No Longer Available
Tube
Part #A19122
Nut .375-16 UNC-2B H – Part Number: SSF-8080-ZN
No Longer Available
Nut .375-16 UNC-2B H
Part #SSF-8080-ZN
Kit Comp Ring HP Rep – Part Number: K-0648
No Longer Available
Kit Comp Ring HP Rep
Part #K-0648
This is an authentic kit that has been sourced from the original manufacturer to be used with Black and Decker, Porter Cable and DeVilbiss air compressors. Over time parts may wear out causing poor performance and eventually requiring replacements. Refer to the appropriate diagrams for your model to ensure the correct repair procedure. This high-quality repair kit includes all the parts shown in the picture. A screwdriver and pliers might be needed to replace these components.
Tube Outlet 2 Stage – Part Number: AC-0803
No Longer Available
Tube Outlet 2 Stage
Part #AC-0803
Eccentric – Part Number: D24597
No Longer Available
Eccentric
Part #D24597
Shroud Rear NS Vert – Part Number: D21026
No Longer Available
Shroud Rear NS Vert
Part #D21026
Gauge 2 OD 300PSI .1 – Part Number: D21929
No Longer Available
Gauge 2 OD 300PSI .1
Part #D21929
Kit Start Capacitor – Part Number: D29142
No Longer Available
Kit Start Capacitor
Part #D29142
Hhp – Part Number: AC-0784
No Longer Available
Hhp
Part #AC-0784
Screw .250-20x.750 H – Part Number: 91895680
$8.29
Special Order
Screw .250-20x.750 H
Part #91895680
This replacement screw is a genuine OEM sourced item commonly utilized on air compressors and pressure washers. It is a standard hardware which has multiple applications depending on the unit. Please make sure to check diagrams of your model for the correct location and used of this screw. This part is made from durable metal and it is sold individually. You will need a wrench to install or remove this hardware.

Common Symptoms of the CPFC2TV3525VP

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
The air was bypassing the compressor gaskets and cylinder wall was worn out
18 of 24 people found this instruction helpful.
  • Charles from GARRISON, TX
  • Easy
  • 30 - 60 mins
  • Screw drivers, Socket set
1 remove cover
2 unhook air line to tank
3 remove head bolts
4 remove intake from head
5 remove flywheel bolt to free up pump piston
6 remove screw on top of piston to change out gasket
7 remove the cylinder sleeve install piston from the top
8 reassemble piston rod end and the flywheel
9 on th e head cover are two gaskets one on top and one on the bottom head
10 insert intake piece and bolt the head cover back in place
11 reinstall the air line and unit cover and secure with three cover screws
Was this helpful?
Thank you for voting!
Can't find this special screw used on many housings etc
4 of 6 people found this instruction helpful.
  • Tim from Tucson, AZ
  • Very Easy
  • 15 - 30 mins
Actually don't like using Torx bits because they are hard to center deep in the channel. I had misplaced these forcing me to order replacements.
My plan is to insert Torx bits before screwing in and using jb weld to secure the bit to the screw, giving me a hex head. Can't find this special screw with a hex head. This screw is called AGC-408 by craftsman.
Was this helpful?
Thank you for voting!
Broken ground on original plug
2 of 2 people found this instruction helpful.
  • Debra from PRESCOTT VLY, AZ
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Removed cover & old cord.
Replaced with new cord & replaced cover.
Works perfect.
Was this helpful?
Thank you for voting!