CMEW231 (Type 1) Craftsman Orbital or Palm Sander - Overview

Maintain smooth operation of your sander with this durable replacement drive belt. This looped, flexible rubber belt controls the movement of the sanding pad, ensuring consistent and efficient sanding. Over time, belts can wear out, lose elasticity, or break due to regular use or improper installation—leading to unstable or erratic pad mo...Read morevement. To replace the belt, first unplug the sander and remove the fasteners securing the housing cover. Carefully note the routing of the old belt before removing it, then position the new belt in place, ensuring proper alignment and tension. Reattach the housing cover and secure it with the appropriate screws to complete the repair.

This dust bag assembly is a reliable replacement part designed to fit a variety of sanders. It includes a fabric dust collection bag and a plastic cap, measuring approximately 5.5 inches in length and 2.5 inches in diameter. The bag efficiently captures dust and debris generated during sanding, helping to maintain a cleaner, safer workspa...Read morece. Over time, the bag may wear out or tear, leading to dust buildup, reduced visibility, and potential health risks. Replacing it is quick and easy—no special tools required. Simply detach the old bag, clean the mounting area, and attach the new one to restore effective dust collection.

This genuine DeWalt replacement switch is designed specifically for random orbit sanders. It functions as a simple on/off (SPST) switch, meaning it either powers the tool on or shuts it off—no complicated settings. If your sander isn’t turning on or the switch feels loose or unresponsive, this part is likely the fix you need. It’s made to...Read more fit a range of DeWalt sander models, so be sure to check your tool’s manual to confirm compatibility before replacing.

This pad assembly (PSA), commonly referred to as a sanding disc, is an original manufacturer part used in orbital sanders. It has four attachment points and a diameter of 5 inches. It features a Velcro backing on one side which allows it to securely hold the sandpaper in place during operation for efficient smoothing of surfaces. If the p...Read moread breaks, becomes dislodged, or is unable to hold the sandpaper, you will notice inefficient and uneven sanding. Remove the faulty pad assembly by removing the retaining screws. If the screws are damaged, worn out, or the threads are stripped, it is recommended to replace them at the same time for optimal performance. Clean the area and align the new pad with the mounting holes. Install the retaining screws to hold it in place. Each pad assembly is sold individually.

This is an authentic DeWalt replacement part that has been sourced from the original manufacturer to be used with circular saws. The rubber boot is used to support the armature by providing compression between the bearing and the motor housing. This item is available as an individual replacement part.

This is an authentic DeWALT and Black & Decker replacement part that is sourced from the original manufacturer for use with saws, grinders, jointers, nibblers, plate joiners, polishers, routers, sanders, and shears. The retaining ring attaches to the ball bearing and is made of metal. When replacing this item an allen wrench and a screwdr...Read moreiver might be required during the installation process. It will need to be replaced if it becomes bent or broken. This part is available as an individual replacement.

This torx screw is specially manufactured for use with a variety of power tools. It is an authentic OEM sourced item, not an aftermarket equivalent. This piece of hardware has multiple uses depending on the tool. Please make sure to check appropriate diagrams for correct location and use of this item. You will need a torx screwdriver to tighten or loosen this screw. It is sold individually, (1) screw per order.

Replace worn or missing hardware with this genuine OEM torx screw. Commonly used across a variety of Bostitch, Black & Decker, Porter-Cable, and DeWALT equipment, this high-quality screw is designed for multiple applications depending on the tool model. It features a torx head and is made from durable metal for long-lasting performance. T...Read morehis screw is sold individually and requires a torx (star-shaped) screwdriver for installation or removal. To ensure proper fit and placement, please consult your tool’s diagram or manual before use.