CME9010CAB Maytag Microwave - Overview

Diagrams for CME9010CAB

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Light Bulb - 40W – Part Number: 8206232A
$10.49
In Stock
Light Bulb - 40W
★★★★★
★★★★★
(92)
Part #8206232A
This 40w light bulb is a replacement bulb constructed of glass and metal. It is an easy-to-install electrical part which produces 40w of light. If the bulb won't light up then it may be broken and should be replaced. The bulb attaches directly to an appropriate light socket and has a small screw-in base. To access the exterior light bulb, you will need to remove the panel on the bottom of the microwave using a Phillips screwdriver. If your exterior light bulb has not been changed before, it is probably held in place with some silicone. You will need to cut away this silicone to remove the old bulb. If you cannot access the silicone with a utility knife, it can be removed using dental floss. Once the silicone is removed, simply unscrew the old bulb, and replace it with the new one. Be sure to disconnect the power to the microwave before you begin this repair. This light bulb measures about 1 1/8 inches. We do not recommend using a higher-wattage bulb for this appliance, and can only recommend this specific bulb. If fixing the bulb does not solve your microwave light issue, it's possibly a problem with the socket, which means the socket and/or board will need to be replaced. This can be a more dangerous repair, so consult your user manual or a technician before attempting.
Light Bulb - 120V 25W – Part Number: WPA3073101
$20.85
In Stock
Light Bulb - 120V 25W
★★★★★
★★★★★
(6)
Part #WPA3073101
This twenty-five watt microwave light bulb is two and a half inches long. It has a small, screw-in base and it carries 120V. This item sells in a quantity of one, though many microwaves require two.
Ceramic Fuse - 20 amp – Part Number: WPM0805101
$16.37
In Stock
Ceramic Fuse - 20 amp
★★★★★
★★★★★
(1)
Part #WPM0805101
This ceramic microwave fuse is just over an inch long. It is white in the center, while each end is made of metal. This is a twenty amp fuse.
Door Interlock Switch Kit – Part Number: 4392027
$146.47
Special Order
Door Interlock Switch Kit
Part #4392027
This kit contains 2 switches - 15 Amp - 125/250 Volt with 3/16" terminals.
Grease and Air Filter – Part Number: WP58001087
$37.35
Special Order
Grease and Air Filter
Part #WP58001087
This grease and air filter is nine inches long and six and a half inches wide. It is made of metal.
Charcoal Filter – Part Number: R0710163
$86.57
Special Order
Charcoal Filter
Part #R0710163
MOTOR-STIR – Part Number: 56001337
$132.47
Special Order
MOTOR-STIR
Part #56001337
Microwave Door Interlock Switch – Part Number: WP56001036
$72.55
Special Order
BLOCK-FUSE – Part Number: W10206728
$22.66
Special Order
BLOCK-FUSE
Part #W10206728
Rack Support – Part Number: Y05200084
No Longer Available
Rack Support
Part #Y05200084
Sold Individually.
Door Handle – Part Number: 54001107
No Longer Available
Door Handle
Part #54001107
Screws not included.
Capacitor – Part Number: 59001160
No Longer Available
Capacitor
Part #59001160

Common Symptoms of the CME9010CAB

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
light bult needed to be replaced
222 of 329 people found this instruction helpful.
  • Deborah from Millersville, MD
  • Difficult
  • Less than 15 mins
  • Screw drivers
The nightmare was that this microwave is installed under the cabinet....in order to get to the light bulb I had to pull out my stove then squeeze into the space between the stove and counter....my old microwave light bult was much easier to change.....Shame on Whirlpool for making this so difficult.....must be a better way to cover the li ght bulb so that we do not need a screwdriver to remove the door to get to the light bulb
Was this helpful?
Thank you for voting!
Bulb "burnt out"
98 of 165 people found this instruction helpful.
  • Joseph from Pembroke, MA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Removed 1 screw, removed "burnt out" bulb and replaced it with new bulb.
Was this helpful?
Thank you for voting!
Microwave worked intermittently depending on how door was closed
67 of 85 people found this instruction helpful.
  • Robert from Bainbridge Island, WA
  • A Bit Difficult
  • 30 - 60 mins
  • Pliers, Screw drivers
Remove top grille (2 screws), undo control panel (1 screw). Tilt down control panel, switches are on the left. There are actually three switches that are involved with the door, two horizontally mounted, one vertically mounted. This would be an EASY REPAIR, but it took me a while to figure out which of the three switches was bad, and a lso took a while to figure out that there is a plastic rod that inserts through the hole in the switch body. Once i figured this out went like a breeze. Lower horizontal switch was the bad one, but since the kit came with two switches i went ahead and replaced the upper horizontal one as well. IT appears that the horizontal switches are probably more likely to fail than the vertical switch based on the position of the switch and force angles. Works great now!
Was this helpful?
Thank you for voting!