CLTW16M1AMG Midea Washer Dryer Combo - Overview

Sections of the CLTW16M1AMG

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Single Phase Asynchronous Motor – Part Number: 11002012019382
Single Phase Asynchronous Motor
PartSelect #: PS18151215
Manufacturer #: 11002012019382
  No Longer Available
Capacitor Assembly – Part Number: 17438000005002
Capacitor Assembly
PartSelect #: PS18188493
Manufacturer #: 17438000005002
  No Longer Available
Overflow Hose – Part Number: 12138000002887
Overflow Hose
PartSelect #: PS18160838
Manufacturer #: 12138000002887
  No Longer Available
Rear Cover – Part Number: 12138000039032
Rear Cover
PartSelect #: PS18160998
Manufacturer #: 12138000039032
  No Longer Available
Power Cord – Part Number: 17438100000586
Power Cord
PartSelect #: PS18188544
Manufacturer #: 17438100000586
  No Longer Available
Outer Tub Hole Cover – Part Number: 12138000001551
Outer Tub Hole Cover
PartSelect #: PS18160801
Manufacturer #: 12138000001551
  No Longer Available
Filtering Cover Assembly – Part Number: 12138000039044
Filtering Cover Assembly
PartSelect #: PS18161006
Manufacturer #: 12138000039044
  No Longer Available
Tub Bottom Base – Part Number: 12138000039045
Tub Bottom Base
PartSelect #: PS18161007
Manufacturer #: 12138000039045
  No Longer Available
Screw And Plain Washer – Part Number: 11301023000001
Screw And Plain Washer
PartSelect #: PS18152364
Manufacturer #: 11301023000001
  No Longer Available
Cross Groove Six Angle Head Screw – Part Number: 11301225000012
Cross Groove Six Angle Head Screw
PartSelect #: PS18152400
Manufacturer #: 11301225000012
  No Longer Available
Up Drain Hose Assembly – Part Number: 12138000009813
Up Drain Hose Assembly
PartSelect #: PS18160937
Manufacturer #: 12138000009813
  No Longer Available
Permanent Magnet Synchronous Pump – Part Number: 11001011000124
Permanent Magnet Synchronous Pump
PartSelect #: PS18150981
Manufacturer #: 11001011000124
  No Longer Available
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Poor spin cycle on washer
Laid washer on its side after disconnecting power and hoses. Removed access panels and loosened motor mounting bolts. Removed old drive belt and installed new one. Adjusted for tension and tightened motor. Reinstalled panels, hoses and power. Fired up, "works fine lasts long time" as the saying goes.
Parts Used:
V-Belt
  • Walter from Gloucester City, NJ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!