This is a replacement burner cap for your gas range or cooktop. The burner cap is found on the burner head, and prevents debris from getting into the head when it is not in use. The cap is black in co...
This burner cap is for your gas range, and acts as a cover for the burner head. It is black in color and just over 3 inches in diameter. If your old burner cap is damaged or missing, this is the part ...
This is a burner cap for your gas range. The cap acts as a cover for the burner head. If your old burner cap is damaged or missing, this is the part that will replace it. The cap is black in color and...
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lynne
August 8, 2023
I’m looking for the pressure regulator
For model number CGS995SEL1SS
Hello Lynne, thank you for reaching out. The pressure regulator that fits in your model is part number PS3654151. We hope this helps!
Was this helpful?
Thank you for voting!
Duc
November 14, 2023
I need help to reset this unit please.After the power outage the display showed nothing beside backward "C". Thank You
For model number CGS995SEL1SS
Hi Duc, thank you for the question. Based on our research, the backward C code that you are referring to indicates that the oven has been set for sabbath mode. We are providing you with some instructions to exit the sabbath mode:
1. Touch the clear/off pad.
2. If the oven is cooking, wait for a random delay period of approximately 30 seconds to 1 minute, until only the backward C is in the display.
3. Press and hold both the bake and warm pads at the same time, until the display shows (SF).
4. Tap the delay start pad until (12 shdn) or (no shdn) appear on the display. (12 shdn) indicates that the oven will automatically turn off after 12 hours. (no shdn) indicates that the oven will not automatically turn off.
5. Touch the start pad.
We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
removed two phillips screws. Unplugged electrical connections replaced unit from PartSelect. They sent holder cover and new bulb (surprise). Great store with great directions.
Removed oven from cabinet. unblug old sensor pluged in new and reinstalled oven. Esay repair though wish oven was designed so did not have to pull itout of cabinet which requires disconect electric cabel
