This dryer repair kit consists of five commonly replaced dryer parts: one multi-rib belt (part #661570V and measures 93 1/2 inches long), four drum support rollers, one idler assembly, nine tri-rings,...
$68.33
In Stock
Order within the next 3 hrs and your part ships today!
This drum support roller is sold individually. Most dryers require two. The tri-rings are included. This is a drum support roller for a dryer. It is a genuine replacement part. The part includes the d...
$28.93
In Stock
Order within the next 3 hrs and your part ships today!
This gas dryer ignition coil set comes with two ignition coils: one three-terminal boost/hold coil, and one two terminal secondary coil. Usually only one of them burns out but you should replace them ...
$39.39
In Stock
Order within the next 3 hrs and your part ships today!
If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found both on the idler pul...
$17.11
In Stock
Order within the next 3 hrs and your part ships today!
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$10.20
In Stock
Order within the next 3 hrs and your part ships today!
This part senses the flame for heat allowing the gas valve to open.This flame sensor is three inches long and is used for many gas clothes dryers.This flame sensor assembly is made of both plastic and metal.
$61.09
In Stock
Order within the next 3 hrs and your part ships today!
Questions And Answers for CGM2745FQ0
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Peter
December 19, 2019
How to remove the lower front cover in order to clean excess lint
For model number CGM2745FQ0
Hello Peter, thank you for your question. If you use a putty knife and slide it between the panel and the door and the panel and the bottom you will come up against some clips. These are clips that can be pressed in and released to access the front bottom of the unit. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Frank
January 13, 2024
The commercial gas dryer (whirlpool cgm2745fq0) wont stop running after 2 hours with 30 minutes or 45 minutes or 60 minutes timing cam, what should I do?
For model number CGM2745FQ0
Hello Frank, thank you for contacting us. Based on the description that you have provided, we would recommend replacing the timer, part number PS16730923, to solve the problem. It controls the electrical components and the duration of the dryer cycles. Glad to be of assistance!
Without installing a cam is there a factory setting for the timer on this drier.
Also, does time accumulate if one user doesnt use all the time does it carry over to the next user.
For model number CGM2745FQ0
Hello Martha, thank you for your question! According to our research, there is no factory setting for the timer without installing a cam. The factory-installed timer is set to provide 45 minutes (4 pins) of drying time when activated by the coin slide. Timer cams for 30-minute (6 pins) and 60-minute (3 pins) drying times are included in the parts bag. The operating time will accumulate for each number of coin slide depressions, depending on the type of timing cam used. We hope this information helps.
Was this helpful?
Thank you for voting!
KIM
December 13, 2023
THE START BUTTON DOESN'T WORK. NEED A NEW START BUTTON ASSEMBLY.
For model number CGM2745FQ0
Hello Kim, Thank you for your inquiry. The push to start switch with inner button is part# PS12070830 . The bezel that goes over top of it is part# PS8745074. We hope this helps.
Just bought the dryer from lowes and the key is missing
For model number CGM2745FQ0
Hello V, Thank you for your inquiry. We have researched the model number you have provided and show the service door key as part# PS11748422. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
First I unplugged the dryer, then removed the back panel, this exposed most all of the wiring and I could see the heater coils. Not knowing what the problem was I started looking at the coils and could not see any broken parts. So then checked the thermal fuse for continuity I removed the two wires from it with a small pair of needle nose pliers, it was held in place by two screws, once they were removed the fuse came out easily, I checked continuity with a volt meter placing the meter on X1 Ohms and could not get a reading. I replaced with a new one and put it all back together the way I took it apart. Then I plugged it in and it worked first time, I now have warm dry clothes.
Cleaning the lint out of the whole machine took quite a bit of time--it was everywhere. Underneath the lint trap was a collection that ultimately ruined the thermal fuse where it restricted the air flow considerably.
Ascertaining the problem was the most time consuming part.
The actual repair was quite simple and didn't take but 15-20 minutes.
Received your parts, Popped them both right into place, Even though only one side needed to be replaced, I wanted them to match up. It was amazing how easy this was. My husband was quite impressed I had ordered these rather then look for either a new or used dryer from some other source.