This is a door handle fastener to secure the handle to your refrigerator drawer. It is also known and a mounting bolt or screw. It is approximately 1 inch in total length, and is made of metal.
This surface element is for ranges.
Surface element supplies the heat to a cooking area on top of the range.
Unplug the range or shut off the house circuit breaker for the range before installin...
This part is a replacement screw for your oven. It is made of black metal and is sold individually. This screw is approximately 1/4 inch in diameter and about 1/2 inch in length. It is designed to con...
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
August 12, 2021
I’m looking to replace the 6 stainless steel temperature control knobs as most of the markings have worn away
For model number CES700P2M1S1
Hello John, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS12716399 for the Single Element knob, PartSelect Number PS12716402 for the Warming Zone Knob, PartSelect Number: PS12716412 for the Double Element Knob and PartSelect Number: PS12716403 for the Triple Element Knob. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Alan
February 13, 2023
My large burner no longer works. How do I troubleshoot or replace it?
For model number CES700P2M1S1
Hi Alan, thank you for contacting us. Before replacing the heating element, part number PS8754838, we would recommend checking the switch assembly, part number PS12709938, and the electronic control board, part number PS12709948. We hope this solves your problem!
8 month old range control panel stopped working, so can’t turn on oven. Stovetop works fine. Panel is blank except for a single bracket shape/C facing left at top of panel.
Tried breakers which are fine.
Help
For model number CES700P2M1S1
Hi Maura, thank you for getting in touch. Based on the description that you have provided, we would recommend checking the glass and touchboard assembly, part number PS12709948, as it is most likely faulty and may need to be replaced. Let us know if you have further questions!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Removed six 1/4" hex nuts on rear of oven. Then through front/inside removed a single 1/4" hex nut to actually remove sensor. Unplug sensor connector, remove. Reversed steps, push oven back in place and plugged in. Tested oven function.
The existing terminal block on my Ge oven/Range had melted due to a loose wire causing sparking and starting the plastic casing of the terminal block on fire and melting it, Part select made the part easy to find and had it at my house in 2 days. All I had to do was remove six screws to take the back sheet metal cover off of the oven. Unscrew the terminal connections remove two mounting screws that held the terminal on to the oven body. This was a little trickier than it should have been because the melted plastic had reformed making it very hard to access the mounting screws. i then mounted the new piece and plugged the oven in, it took 15 minutes and was very easy. definitely saved me at-least a $100 for the service call i would have made if finding the part wasn't so convenient
Unplugged appliance and removed 5 screws on back of stove/oven and removed plate. Disconnected the sensor and unscrewed it on the inside of the oven. Pulled the cord through and replaced with new sensor. Replaced all parts and plugged in the appliance and tested. Worked great.
