CES1350AAH Magic Chef Range - Overview

Diagrams for CES1350AAH

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Light Bulb - 40W – Part Number: 8009
$26.41
In Stock
Light Bulb - 40W
★★★★★
★★★★★
(47)
Part #8009
This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are most often used to light the inside of refrigerators and ranges. It features a standard socket base, which means you simply unscrew the burnt-out bulb and screw in the replacement. Depending on the appliance you may require a screwdriver or nut driver to access the light bulb. We recommend you wear work gloves while handling this replacement part. It is constructed of glass and metal and is sold individually. Depending on the appliance and location of the bulb within it, you may want to consider disconnecting power and using a flashlight for easier access to unscrewing and re-screwing in your bulb during this repair.
Chrome Drip Bowl - 8 inch – Part Number: WPW10196405
$17.96
In Stock
Chrome Drip Bowl - 8 inch
★★★★★
★★★★★
(23)
Part #WPW10196405
This manufacturer-certified drip bowl is also known as a drip pan, and it is designed for use with cooktops and ranges. It sits below 8-inch burner elements and catches drips and spills from the cookware on the burner. The diameter of the drip bowl is approximately 10 inches. This replacement might appear slightly different, but it will fit your appliance. You will need no tools to complete this repair. Simply remove the burner element, remove the old bowl, line up the hole on the new bowl with the terminal block and drop it into place. Make sure the bowl is flat before reinstalling the element. While you have the element out you should inspect the terminals for corrosion, damage, or discolouration. If you notice any of those things you should also replace the element and terminal block. You will need to replace your drip bowl if it is lost, damaged, or can no longer be cleaned. This replacement part is sold individually. To extend the life of your new drip bowl we recommend you clean it regularly with soap and water. We recommend only using the recommended drip bowl for your appliance; generic versions will not fit properly which could affect the performance of your elements and cause long-term damage.
Surface Burner Receptacle Kit – Part Number: 12001676
$27.20
In Stock
Surface Burner Receptacle Kit
★★★★★
★★★★★
(30)
Part #12001676
This kit comes with one ceramic block, metal bracket, wires, and hi-temp wire nuts.
Oven Bake Element – Part Number: WP74010750
$52.44
In Stock
Oven Bake Element
★★★★★
★★★★★
(76)
Part #WP74010750
This bake element has push-on terminal ends. NOTE: This element has been updated by the manufacturer. New installation screws are required. Screws are sold separately.
Long Oven Sensor – Part Number: 12001656
$52.75
In Stock
Long Oven Sensor
★★★★★
★★★★★
(27)
Part #12001656
The oven sensor detects the temperature within the oven cavity and sends the information to the control board. If your oven is not heating evenly, has little or no heat when baking, or is too hot, you may need to replace the sensor. This long oven sensor kit comes with two harness adapters and is a genuine OEM part. Please remember to disconnect the power before starting your repair.
Leveler Foot Screw (Nylon) – Part Number: W11665456
$33.95
In Stock
Leveler Foot Screw (Nylon)
★★★★★
★★★★★
(7)
Part #W11665456
This leveling leg is two inches long. It is all black in color and it is made entirely of plastic.
Drip Bowl - 6 Inch – Part Number: W10196406RW
$23.29
In Stock
Drip Bowl - 6 Inch
★★★★★
★★★★★
(9)
Part #W10196406RW
This part has been substituted by the manufacturer and has a hole in the center. It no longer has a solid bottom.
Screw – Part Number: W11233072
$30.40
In Stock
Screw
★★★★★
★★★★★
(5)
Part #W11233072
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch. It has 6 threads. Refer to the manual provided by the manufacturer for further information on repair and accurate guidance. Remember to wear work gloves as a safety precaution.
Range Broil Element – Part Number: WPW10310249
$125.12
In Stock
Range Broil Element
★★★★★
★★★★★
(11)
Part #WPW10310249
This broil element is found on the roof of the oven.
Range Terminal Block – Part Number: WPW10245259
$41.51
In Stock
Range Terminal Block
★★★★★
★★★★★
(2)
Part #WPW10245259
It provides a way of connecting individual electrical wires and offers protection of the device from electrical surges (voltages and/or currents).
Screw - 10-16 x 1 – Part Number: WP3387230
$10.44
In Stock
Screw - 10-16 x 1
★★★★★
★★★★★
(2)
Part #WP3387230
This screw is sold individually.
Door Seal – Part Number: WP7212P043-60
$64.85
In Stock
Door Seal
★★★★★
★★★★★
(6)
Part #WP7212P043-60
This door seal is fifty-three inches long. It is all black in color and is made of rubber. There are metallic clips sticking out of this seal at various points. These clips help to secure the seal to range doors.

Manuals & Care Guides for CES1350AAH

Click to download

Common Symptoms of the CES1350AAH

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Stove top element not working due to bad receptacle.
196 of 216 people found this instruction helpful.
  • Richard from Carthage, NC
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
Turned off the power at the breaker box, cut the wires approximately 5 inches from the bad receptacle and removed it after removing one screw. Stripped back the wires about 1/2 inch and attached the new wires with the ceramic wire nuts provided and secured the receptacle back in place with the new screw provided in the kit.
My sister 's husband wanted to scrap the whole range but I repaired it with $14.00 worth of parts.
The element is working great now.
Whenever I need appliance parts again I'll use partselect.com.
Was this helpful?
Thank you for voting!
The element broke in two pieces after food dried on it.
179 of 185 people found this instruction helpful.
  • Heather from Huntsville, AL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
First, I unplugged the oven. Then, I removed the two screws that hold the element in place. After that, I gently pulled the element toward the front of the oven until the wires were exposed. I disconnected the wires from the old element, removed the old element and then attached the wires to the new baking element. I gently pushed the new element back into the screw holes and screwed the new element in place. When I plugged the oven back into the wall I heard a pop and thought I'd blown up the oven! Turns out the breaker popped...after fixing the breaker, I turned the oven on and the element worked just fine. I highly recommend PartSelect.com for their fast shipping and great products. I will be ordering from them again for future appliance parts.
Was this helpful?
Thank you for voting!
Oven not holding 350 F, when cooling the coils did not reheat
163 of 215 people found this instruction helpful.
  • David from Westford, MA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Removed the oven door by opening slightly, then pic door up to remove. Remove 2 screws holding oven sensor in place, gently pull on sensor to remove, had to remove about 8 inches to get at plastic connector. Unplug connector, had to use an adapter cable supplied with the PartSelect kit to install new sensor, push cable back into opening, reinstall 2 screws. The oven works fine! Note that due to thermal lag the temperature overshoots to 370 degrees and undershoots to 340 degrees, this appears to be normal oven operation. Putting door back in place was easy.
Was this helpful?
Thank you for voting!