CER1115AAW Magic Chef Range - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Chrome Drip Bowl - 8 inch – Part Number: WPW10196405
$17.96
In Stock
Chrome Drip Bowl - 8 inch
★★★★★
★★★★★
(23)
Part #WPW10196405
This manufacturer-certified drip bowl is also known as a drip pan, and it is designed for use with cooktops and ranges. It sits below 8-inch burner elements and catches drips and spills from the cookware on the burner. The diameter of the drip bowl is approximately 10 inches. This replacement might appear slightly different, but it will fit your appliance. You will need no tools to complete this repair. Simply remove the burner element, remove the old bowl, line up the hole on the new bowl with the terminal block and drop it into place. Make sure the bowl is flat before reinstalling the element. While you have the element out you should inspect the terminals for corrosion, damage, or discolouration. If you notice any of those things you should also replace the element and terminal block. You will need to replace your drip bowl if it is lost, damaged, or can no longer be cleaned. This replacement part is sold individually. To extend the life of your new drip bowl we recommend you clean it regularly with soap and water. We recommend only using the recommended drip bowl for your appliance; generic versions will not fit properly which could affect the performance of your elements and cause long-term damage.
Drip Bowl - 6 Inch – Part Number: WPW10196406
$14.10
In Stock
Drip Bowl - 6 Inch
★★★★★
★★★★★
(48)
Part #WPW10196406
This drip bowl is used for electric cooktops and ranges, it is designed to sit under a 6-inch surface burner. It catches the drips and spills coming from the cookware on the surface burner. This drip bowl is chrome, and it has a diameter of 8 inches. You need to remove the burner element to replace this part. Line the hole up with the element terminal blocks, and ensure the new bowl is flush with the surface of the cooktop before replacing the burner element. Drip bowls need to be replaced when they are lost, damaged, or you are no longer able to clean them adequately. This replacement part is sold individually.
Oven Bake Element – Part Number: WP74010750
$52.44
In Stock
Oven Bake Element
★★★★★
★★★★★
(76)
Part #WP74010750
This bake element has push-on terminal ends. NOTE: This element has been updated by the manufacturer. New installation screws are required. Screws are sold separately.
Leveler Foot Screw (Nylon) – Part Number: W11665456
$33.95
In Stock
Leveler Foot Screw (Nylon)
★★★★★
★★★★★
(7)
Part #W11665456
This leveling leg is two inches long. It is all black in color and it is made entirely of plastic.
Drip Bowl - 6 Inch – Part Number: W10196406RW
$23.29
In Stock
Drip Bowl - 6 Inch
★★★★★
★★★★★
(9)
Part #W10196406RW
This part has been substituted by the manufacturer and has a hole in the center. It no longer has a solid bottom.
Screw – Part Number: W11233072
$30.40
In Stock
Screw
★★★★★
★★★★★
(5)
Part #W11233072
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch. It has 6 threads. Refer to the manual provided by the manufacturer for further information on repair and accurate guidance. Remember to wear work gloves as a safety precaution.
Range Broil Element – Part Number: WPW10310249
$125.12
In Stock
Range Broil Element
★★★★★
★★★★★
(11)
Part #WPW10310249
This broil element is found on the roof of the oven.
Range Terminal Block – Part Number: WPW10245259
$41.51
In Stock
Range Terminal Block
★★★★★
★★★★★
(2)
Part #WPW10245259
It provides a way of connecting individual electrical wires and offers protection of the device from electrical surges (voltages and/or currents).
Screw - 10-16 x 1 – Part Number: WP3387230
$10.44
In Stock
Screw - 10-16 x 1
★★★★★
★★★★★
(2)
Part #WP3387230
This screw is sold individually.
Door Seal – Part Number: WP7212P043-60
$64.85
In Stock
Door Seal
★★★★★
★★★★★
(6)
Part #WP7212P043-60
This door seal is fifty-three inches long. It is all black in color and is made of rubber. There are metallic clips sticking out of this seal at various points. These clips help to secure the seal to range doors.
Dryer Screw – Part Number: WP90767
$10.40
In Stock
Dryer Screw
Part #WP90767
This screw is sold individually.
Range Anti-Tip Bracket – Part Number: WP3801F656-51
$15.34
In Stock
Range Anti-Tip Bracket
★★★★★
★★★★★
(2)
Part #WP3801F656-51
Sold individually.

Manuals & Care Guides for CER1115AAW

Click to download

Common Symptoms of the CER1115AAW

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Drip bowls were burned and tacky
473 of 483 people found this instruction helpful.
  • Donna from Dallas, TX
  • Really Easy
  • Less than 15 mins
First I removed the old bowls and replaced them with the new.
Was this helpful?
Thank you for voting!
Drip bowls needed to be replaced
455 of 546 people found this instruction helpful.
  • John from Chester, VT
  • Really Easy
  • Less than 15 mins
took old bowls out, put new bowls in, took a coffee break
Was this helpful?
Thank you for voting!
The element broke in two pieces after food dried on it.
179 of 185 people found this instruction helpful.
  • Heather from Huntsville, AL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
First, I unplugged the oven. Then, I removed the two screws that hold the element in place. After that, I gently pulled the element toward the front of the oven until the wires were exposed. I disconnected the wires from the old element, removed the old element and then attached the wires to the new baking element. I gently pushed the new element back into the screw holes and screwed the new element in place. When I plugged the oven back into the wall I heard a pop and thought I'd blown up the oven! Turns out the breaker popped...after fixing the breaker, I turned the oven on and the element worked just fine. I highly recommend PartSelect.com for their fast shipping and great products. I will be ordering from them again for future appliance parts.
Was this helpful?
Thank you for voting!