This dryer repair kit consists of five commonly replaced dryer parts: one multi-rib belt (part #661570V and measures 93 1/2 inches long), four drum support rollers, one idler assembly, nine tri-rings,...
This drum support roller is sold individually. Most dryers require two. The tri-rings are included. This is a drum support roller for a dryer. It is a genuine replacement part. The part includes the d...
If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found both on the idler pul...
Also known as Thermal Cut-Off kit. The thermostat acts as a safety mechanism that keeps the dryer from overheating and the fuse is like a backup system - it's set to trip at a higher temperature than...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sean
October 28, 2022
I need a new switch that controls the high, medium and low temperature. Thanks
For model number CEM2745FQ0
Hi Sean, thank you for reaching out. According to our research, this model comes with a selector switch for heavy-duty, normal, and delicate modes. If your switch is not advancing, you need to replace the selector switch, part number PS11752926. We hope this helps! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
I have two Whirlpool CEM2745fq coin operated dryers that are about a year old and have the same problem. Sometimes they run for an hour sometimes they run for three hours. I’m not sure how long they’re been doing it, I only noticed the problem after a customer complaint. The factory cams are still installed and I’ve marked the cams and can see them advancing. The dryers cycle between 135-170 degrees so they’re drying fine. I’ve checked and there are no lint obstructions.
For model number CEM2745FQ0
Hello Tony, thank you for your inquiry. We do sell the Timer PS11755924 and the Timer Cam PS11741423. We hope this is of some help.
Was this helpful?
Thank you for voting!
GUY
March 24, 2023
I HAVE 4 OF THESE DRYERS. THEY ALL RUN AT VARIOUS AMOUNTS OF TIME .COULD RUN FOR 50 MINUTES ONE TIME THE 3 HOURS NEXT TIME. CAMS ARE MOVING. VENT OK TOO.
For model number CEM2745FQ0
Hello Guy, thank you for contacting us. The lint filter might be clogged. Dryer sheets and fabric softeners can leave a residue on the lint filter, reducing the airflow. If the lint filter, part number PS1491676, is clogged, clean it. A dryer's faulty heating element and thermostat could be the cause of your issue. Use a multimeter to check these parts for continuity. If there is no continuity, replace the heating element, part number PS11738031, and the thermostat, part number PS11741456. If these parts are okay, you may need to replace the control board, part number PS7320635. We hope that helps!
I desperately need a key to open the coin box on this commercial dryer. Is there anything you can do to help me with this problem. It cannot be used now until the box is open and I've lost the key.
Serial #MX1103741
TYPE DDOT-ELE-2406026-CS56
For model number CEM2745FQ0
Hi Nancy, thank you for the question. We have found that the key is not available separately but comes with the coinbox, part number PS12578201. To replace the key, you may need to replace the coinbox. Glad to be of help!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
First I unplugged the dryer, then removed the back panel, this exposed most all of the wiring and I could see the heater coils. Not knowing what the problem was I started looking at the coils and could not see any broken parts. So then checked the thermal fuse for continuity I removed the two wires from it with a small pair of needle nose pliers, it was held in place by two screws, once they were removed the fuse came out easily, I checked continuity with a volt meter placing the meter on X1 Ohms and could not get a reading. I replaced with a new one and put it all back together the way I took it apart. Then I plugged it in and it worked first time, I now have warm dry clothes.
Cleaning the lint out of the whole machine took quite a bit of time--it was everywhere. Underneath the lint trap was a collection that ultimately ruined the thermal fuse where it restricted the air flow considerably.
Ascertaining the problem was the most time consuming part.
The actual repair was quite simple and didn't take but 15-20 minutes.
Received your parts, Popped them both right into place, Even though only one side needed to be replaced, I wanted them to match up. It was amazing how easy this was. My husband was quite impressed I had ordered these rather then look for either a new or used dryer from some other source.
