CDG4205AWW Crosley Dryer - Overview

This drum support roller includes one drum roller and two bearings. Most dryers use two drum rollers, and it is recommended to change both at once.

This roller shaft is the axle for the drum roller, also known as drum roller axle.

This front glide kit comes with a blue plastic glide, a brown cork pad, and two metallic rivets. Two kits are required per appliance. A rivet tool is required for this installation.

This metallic retaining ring is less than an inch in diameter. It is made entirely of metal.

At 91-5/8 inches in length, this dryer drum belt from Maytag has five ridges. It is all black in color and is made entirely of rubber. This flat belt is 3/8 of an inch wide.

This idler pulley wheel is white and made of plastic. It is two inches in diameter and comes with a center bearing.

This is a rectangle shaped lint filter screen used for some gas and electric clothes dryers. The dimensions of this lint filter screen are approximately twelve and a half inches long by seven and three quarter inches wide. This is a white filter and the screen is made of white nylon mesh.

This roller shaft washer is just under an inch in diameter and is used for some of Whirlpool's brands of clothes dryers.Sold individually.

This kit comes in two pieces: the catch and the clip.

This idler pulley shaft washer is used with many clothes dryers. It is less than an inch long, and it is black in color.

This seal can be used for the front or rear drum. Adhesive is NOT included. For adhesive search: WPY055980

This part senses if the igniter is hot enough to ignite the flame for heat, allowing the gas valve to open. The sensor is three inches long and is used for many gas clothes dryers. If your dryer is not creating any heat, taking too long to dry or shuts off too soon, you may need to replace the flame sensor. This is a genuine OEM part and ...Read moreis made of both plastic and metal. Please remember to disconnect power to your dryer before starting your repair.