CDBEH600SB2A Frigidaire Dishwasher - Overview

Diagrams for CDBEH600SB2A

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Lower Spray Arm – Part Number: 5304517203
$54.95
In Stock
Lower Spray Arm
★★★★★
★★★★★
(172)
Part #5304517203
The Lower Spray Arm is used in your dishwasher to spray water and clean your dishes. If broken there will be visible damage or your dishes may no longer be cleaned properly. If your spray arm is broken (due to general wear or high heat), it should be replaced. Your lower spray arm will be located at the bottom of your dishwasher tub. Check your user manual and model number to ensure this model is right for you. This version is plastic and metal and comes in gray/blue. We recommend you wear work gloves to keep your hands safe when installing and disconnect power to the appliance. You will also want to make sure that you turn off the water supply to your dishwasher. From here, you will want to open the dishwasher, pull out the lower rack and set it aside. Remove the lower wash arm. On each side of the bottom of the spray arm, there are small locking tabs that can be pushed aside using a flathead screwdriver. Once released, the spray arm can easily be pulled off the dishwasher. Put the new lower wash arm in place and push it down to lock it in. Ensure it is spinning freely and does not hit the heating element. Return the lower dish rack into place and then close the dishwasher door.
Upper Spray Arm – Part Number: 5304506516
$43.95
In Stock
Upper Spray Arm
★★★★★
★★★★★
(42)
Part #5304506516
The upper spray arm helps distribute water from the top of the dishwasher tub.This spray arm is a genuine OEM replacement part for your dishwasher. This spray arm is for the upper part of your dishwasher. No tools are required for this repair, simple remove the rack stops and upper dish rack, then disassemble the mount and spray arm before installing the new one.
Silverware Basket – Part Number: 5304535382
$40.57
In Stock
Silverware Basket
★★★★★
★★★★★
(52)
Part #5304535382
This is a basket for washing flatware or silverware in your dishwasher.
Wheel & Bushing Assembly – Part Number: 5304532229
$14.14
In Stock
Wheel & Bushing Assembly
★★★★★
★★★★★
(11)
Part #5304532229
The single rack roller kit comes with one axle/clip and one wheel/roller. The rack wheel is designed to allow the rack of your dishwasher to roll in and out. If the rack will not complete this task, or you notice that your dishwasher is not cleaning dishes properly, you may need to replace the rack wheel. The single rack roller kit is made of white plastic, and clips to the dishwasher rack with the included axle/clip. Many of our customers have described this repair as easy, and you will not require any tools to complete it. Lower rack roller and bracket assembly, grey. Wheel has been updated. If wheel pictured is not like old one, you may need to replace all wheels.
RACK ASSEMBLY,LOWER,GREY – Part Number: 5304535768
$177.14
In Stock
RACK ASSEMBLY,LOWER,GREY
★★★★★
★★★★★
(99)
Part #5304535768
This part is a genuine OEM part. This grey lower dish rack assembly comes with eight light-gray rollers for easy access. The dish rack is approximately 21 inches wide x 22 inches deep. The dish rack holds dishes in place during the dish washing cycle. If you see rust spots on the dishes, the lower rack will not pull out, or the lower rack is visibly rusted or damaged, you will need to replace the part. Other common symptoms include: unusual or loud noises coming from the unit, or the dishes on the lower rack not being washed properly.
SUPPORT – Part Number: 5304532235
$18.95
In Stock
SUPPORT
★★★★★
★★★★★
(18)
Part #5304532235
This part is a replacement spray arm support for your dishwasher. It is made of white plastic and is approximately 3 inches long, 1 inch wide, and 3 inches tall. This is the support for the lower spray arm and is found at the bottom of the dishwasher. The lower spray arm spins on the support when the dishwasher is running. If the support is cracked or broken, the spray arm may not spin, and your dishes will not be cleaned properly. You may also notice that your dishwasher is noisy when it runs; this can mean the arm support is damaged as well.
Latch – Part Number: 5304525218
$53.32
In Stock
Latch
★★★★★
★★★★★
(36)
Part #5304525218
If your dishwasher won’t start or the door won’t close properly, the latch assembly might need replacing. This part helps keep the door securely shut and includes a switch that stops the dishwasher from running when the door is open. It’s easy to install, but make sure to unplug your dishwasher before starting the repair for safety.
RACK ASSEMBLY,UPPER – Part Number: 140229954072
$158.09
In Stock
RACK ASSEMBLY,UPPER
★★★★★
★★★★★
(12)
Part #140229954072
The upper dishrack is used to hold your dishes in place while the dishwasher goes through the wash cycles. Over time the dishrack can become damaged, start to rust, or be missing rollers, and the dishrack will need to be replaced. This rack is white in color and does not include the rollers and measures approximately 23 Inch x 23 Inch. This is a genuine OEM part.
Dishwasher Door Bottom Seal – Part Number: 5304500204
$43.95
In Stock
Dishwasher Door Bottom Seal
★★★★★
★★★★★
(16)
Part #5304500204
This door seal is for dishwashers. Door seal seals the gap between the opening to the dishwasher tub and the outer edge of the door. After installing the door seal, shut the dishwasher door and leave the door closed for several hours to properly seat the new door seal.
Heating Element Brass Nut – Part Number: 154106202
$19.95
In Stock
Heating Element Brass Nut
★★★★★
★★★★★
(8)
Part #154106202
This nut is sold individually. It is used to install the heating element.
Dishwasher Drain Hose – Part Number: 807117001
$49.96
In Stock
Dishwasher Drain Hose
★★★★★
★★★★★
(8)
Part #807117001
The drain hose connects to the pump located below the lower spray arm. It aids in proper dishwasher drainage. Size: 7.5 feet long
Door Spring – Part Number: 154579101
$58.25
In Stock
Door Spring
★★★★★
★★★★★
(26)
Part #154579101
Sold individually.

Common Symptoms of the CDBEH600SB2A

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
The spray arm would fall off during the washing cycle.
827 of 844 people found this instruction helpful.
  • Roy from Worcester, MA
  • Really Easy
  • Less than 15 mins
Repair was simple. I unscrewed the old grommet which held the old spray arm and screwed-on the new one. About 30 seconds was required. Other people having this problem should note that the spray-arm is made of three pieces which are inseparable when the arm is new. The arm is sold in this form. However, when your machine is having th e problem that the arm falls off, the three pieces become separate. When you want to replace the spray arm, only one new part needs to be ordered because this part encompases all three components.
Was this helpful?
Thank you for voting!
Lower Rack Roller Missing
379 of 395 people found this instruction helpful.
  • Sandra from Mount Vernon, WA
  • Really Easy
  • Less than 15 mins
Took the roller out of the package, snapped it into place. Less than 15 seconds. Works good as new.
Was this helpful?
Thank you for voting!
spray arm keeps melting
284 of 301 people found this instruction helpful.
  • Donna from Madison, OH
  • Really Easy
  • Less than 15 mins
I have had to keep replacing the spray arm on the bottom of my dishwasher which takes like 2 seconds to do.. First you open the dishwasher and than pull the bottom basked forward and reach down and pull the spray arm up and pop the bottom of the spray arm off and put it on the new spray arm and slip it back into the dishwasher over the t hing that makes it spin around.. but the tricky part is and I didn't know this and this is why my dishwasher spray arm kept falling over and melting on the heating element.. you have to turn it till it clicks in.. and your done..
Was this helpful?
Thank you for voting!