CDB1500AWW Magic Chef Dishwasher - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Door Latch Assembly – Part Number: W10862259
$113.71
In Stock
Door Latch Assembly
★★★★★
★★★★★
(54)
Part #W10862259
This assembly is a simple on/off mechanism that prohibits the dishwasher from operating when the door is open.
Dishwasher Door Latch w/Switches No Handle – Part Number: WPW10275768
$95.17
In Stock
Dishwasher Door Latch w/Switches No Handle
★★★★★
★★★★★
(17)
Part #WPW10275768
This dishwasher door latch helps keep the dishwasher door securely closed during operation while housing the door switches that signal the appliance it is safe to begin a wash cycle. This part is JUST the latch, it does not include the handle. Please see model information to determine if the latch WITH the handle is available for your unit. Replacing a faulty latch can help resolve issues such as a door that will not close properly, a dishwasher that will not start, unexpected door opening during operation, water leaks, or intermittent power problems. This assembly includes the latch and switches but does not include the door handle. Installation typically involves disconnecting power to the appliance, removing the inner door panel to access the latch assembly, disconnecting the wiring harness, installing the new latch, and reassembling the door. For a complete repair, inspect the door strike, handle, and related door components for wear or damage and replace them as needed to ensure proper door operation and sealing.
Dishwasher Accumulator Filter – Part Number: WPW10192799
$277.59
In Stock
Dishwasher Accumulator Filter
★★★★★
★★★★★
(13)
Part #WPW10192799
This part is essential in your dishes getting clean during the wash cycle. If there is any debris or a tear in the filter, it can cause extra buildup and, therefore, causing dirty dishes.
Dishwasher Door Cable Link – Part Number: WP99003446
$15.49
In Stock
Dishwasher Inner Door Foam Insulation Strip – Part Number: WPW10117748
$39.55
Special Order
Dishwasher Inner Door Foam Insulation Strip
★★★★★
★★★★★
(9)
Part #WPW10117748
This inner door insulation seal is almost twenty-four inches long. It is gray in color and is made of a foam material.
Docking Station with Flappers – Part Number: WP6-917647
No Longer Available
Docking Station with Flappers
★★★★★
★★★★★
(11)
Part #WP6-917647
The docking station is located on the water supply tube at the far back. It provides water to the upper and middle spray arm and also includes the flappers.
Washer Hose Clamp – Part Number: WP596669
$11.52
In Stock
Washer Hose Clamp
Part #WP596669
This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
Water Valve – Part Number: W11082871
$146.34
In Stock
Water Valve
★★★★★
★★★★★
(11)
Part #W11082871
This is the replacement water valve for your dishwasher. The water inlet valve connects to the water source and solenoid wires, and ensures the tub has the right amount of water entering it. If your dishwasher continues to fill after it is full, or if it fills slowly, you may need to replace this valve. Before you begin this repair, be sure to disconnect the water and power sources from your dishwasher. This part is sold individually and is an OEM part sourced directly from the manufacturer.
USE WPL 99002588 – Part Number: 99002588
No Longer Available
USE WPL 99002588
Part #99002588
It provides a waterproof seal between the tub and the door.
Dishwasher Rail Stop – Part Number: WPW10261227
$15.35
In Stock
Dishwasher Rail Stop
Part #WPW10261227
This part is at the end of the rails to stop your dishrack from being pulled all the way out. Sold individually.
Tub Wheel - NOT a Rack Wheel – Part Number: WP99002947
$20.77
In Stock
Tub Wheel - NOT a Rack Wheel
Part #WP99002947
This wheel attaches to the inside of the tub to help guide the track and support the top rack.
Seal and Chopper Kit – Part Number: WP6-919539
No Longer Available
Seal and Chopper Kit
★★★★★
★★★★★
(1)
Part #WP6-919539
THE COURSE THREADED SLEEVE IS NLA SO THE KIT SHOULD NOW ONLY HAVE 1 SLEEVE 07/18KC UPGRADE TO NEW MOTOR WHICH CONTAINS SHAFT W10118627 1/14KC

Manuals & Care Guides for CDB1500AWW

Click to download

Common Symptoms of the CDB1500AWW

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
2 broken wheels on basket
371 of 374 people found this instruction helpful.
  • jeanne from waynesboro, TN
  • Really Easy
  • Less than 15 mins
unwrapped wheels ,pulled out drawer and easily put on new wheels...as we live way out in the boonies it was great to be able to order parts and have them delivered so fast...easy to fix....
Was this helpful?
Thank you for voting!
Handle and latch broke
142 of 156 people found this instruction helpful.
  • Marilyn from Marsing, ID
  • Really Easy
  • Less than 15 mins
I had to force the door open, due to a broken handle/latch.
Ordered assembly with help of order desk to assure correct part number. Arrived within 3 to 4 days. Not sure but very fast. Only had to wash dishes by hand once.
Turned off power to dishwasher, my electrical panel is clearly marked with switch for dishwasher. No guess work there.
3 min. to remove old assy. 3 min. to replace with new part.
I might add that I am a 67yr. old female. So if I can handle this repair, anyone can.
Saved repairman service call, or purchasing a new dishwasher.
Was this helpful?
Thank you for voting!
Broken Inlet Valve due to freezing - water leak
86 of 87 people found this instruction helpful.
  • Craig from Old Orchard Beach, ME
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Wrench (Adjustable)
Most of the time was spent pulling out the dishwasher from under the counter, as a new tile floor had been installed after the DW was installed.

Great pictures of components on this website confirmed what part to order.

Shut off water feed to DW and disconnect power to DW.

Unplug wire connector to old valve (solenoid) and disconnect water inlet hose. Observe that valve is attached to sheet metal bracket.

Remove bracket, with valve attached. Don't remove valve from bracket. New valve comes with sheet metal bracket.

Remove female threaded adaptor (brass) from back of old valve and screw on to new valve using Teflon tape. That is the only piece you need to reuse.

Attached the new bracket (with valve attached) to DW. Attach water inlet hose. Attach plug to new valve.

Turn on water to DW. Check for leaks. Retighten hose connection if required. Run dishwasher. Keep lower panel off for a couple of days to be certain no leaks develop.
Was this helpful?
Thank you for voting!