C950529430 Craftsman Snow Blower - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Lower Drive Cable (12'') – Part Number: 1501122MA
$15.95
In Stock
Lower Drive Cable (12'')
Part #1501122MA
This lower front drive cable is designed to engage and disengage the traction system on two-stage snowblowers, allowing smooth, reliable forward and reverse movement. Built with a durable steel inner wire and protective outer conduit, it helps maintain consistent drive response in cold, demanding conditions. Ideal for replacing a stretched, frayed, or broken cable, it restores dependable traction control and easy handling during snow-clearing operation.
NUT – Part Number: 5025391FS
$7.95
Special Order
NUT
Part #5025391FS
Auger Clutch Cable – Part Number: 761872MA
$29.95
Special Order
Auger Clutch Cable
Part #761872MA
Pin – Part Number: 500016MA
$29.95
Special Order
Pin
Part #500016MA
This genuine OEM axle shaft pin is designed for use with Murray and Simplicity snow throwers. Made from durable metal, this part securely connects the wheel to the axle shaft, ensuring proper traction and movement during operation. To ensure compatibility, it’s recommended to consult your model’s parts diagram before ordering. This pin is sold individually and is an essential component for maintaining the structural integrity and performance of your snow thrower.
Cap-pipe – Part Number: 695757
No Longer Available
Cap-pipe
Part #695757
Hair Pin – Part Number: 1501293MA
No Longer Available
Hair Pin
Part #1501293MA
Band Saw Blade Guide – Part Number: 823572
No Longer Available
Band Saw Blade Guide
Part #823572
This is a genuine Ridgid replacement part, it is sold individually. The purpose of the 823572 Guide Block is to keep the the bandsaw blade as straight and vertical as possible when cutting material. There are four Guide Blocks on the bandsaw. To adjust the Guide Blocks • Two adjustments must be made. • First, the block guides must be adjusted in the back-forward direction so that the blocks themselves are centered on the width of the blade. • The block guides must also be adjusted in the side-to-side direction. Adjust the block guides so that the blocks themselves just barely touch the bandsaw blade.
SCREW, 10-24X.375 – Part Number: 706144
No Longer Available
SCREW, 10-24X.375
Part #706144
Pulley – Part Number: 1501115MA
No Longer Available
Pulley
Part #1501115MA
This is an authentic manufacturer-sourced component from the Murray manufacturer. The friction pulley is constructed of durable metal, and is made for use with many snowthrower machines. The friction pulley is secured onto the swinging l.f. plate (yz), assisting with the movement of the snowblower through the rotation of the friction disc. This component also helps the drive belt transmit force to related components. This item is sold individually. A wrench and a screwdriver are often necessary for the replacement.
Pipe-Oil – Part Number: 696683
No Longer Available
Pipe-Oil
Part #696683
Control Panel – Part Number: 1741123BNYP
No Longer Available
Control Panel
Part #1741123BNYP
Engine – Part Number: 20M1140141E1
No Longer Available
Engine
Part #20M1140141E1

Common Symptoms of the C950529430

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Refurbishing for next winter season
8 of 14 people found this instruction helpful.
  • Kenneth from ALDAN, PA
  • Easy
  • 30 - 60 mins
  • Socket set, Wrench set
I replaced the auger belt and drive belt by separating the machine. The auger belt alone can be replaced by simply tilting without separating but the drive belt can not. So after separating the machine, I removed the auger belt by loosening the belt guide and removing the tensioner. I then loosened the nut that secures the drive wheel. This gave me enough play to remove the drive belt from the drive tensioner and then wiggle it from the drive wheel and out of the machine. Install by wiggling the belt back behind the drive wheel until you can slip it on the wheel. pull tensioner pulley out of the way to get the belt on the top pulley. Tighten the nut to secure the drive wheel. Reconnect the machine at the bottom of the auger housing and replace the auger belt, tensioner, and belt guide. Complete by replacing the upper bolts that hold the two parts together. I have not replaced the friction wheel as of yet. My process took 30 - 45 minutes for both belts.
Was this helpful?
Thank you for voting!