C950-52411-0 (2004) Craftsman Snow Blower - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Lower Drive Cable (12'') – Part Number: 1501122MA
$15.95
In Stock
Lower Drive Cable (12'')
Part #1501122MA
This lower front drive cable is designed to engage and disengage the traction system on two-stage snowblowers, allowing smooth, reliable forward and reverse movement. Built with a durable steel inner wire and protective outer conduit, it helps maintain consistent drive response in cold, demanding conditions. Ideal for replacing a stretched, frayed, or broken cable, it restores dependable traction control and easy handling during snow-clearing operation.
Auger Clutch Cable – Part Number: 761872MA
$29.95
Special Order
Auger Clutch Cable
Part #761872MA
Spacer-Fuel Tank – Part Number: 710247
No Longer Available
Spacer-Fuel Tank
Part #710247
Clutch Cable (28.44L) – Part Number: 1501123MA
No Longer Available
Clutch Cable (28.44L)
Part #1501123MA
This is an authentic manufacturer-sourced item that is specially designed for Murray and Simplicity snowthrowers. It connects the control lever to the clutch in the drive system allowing a user to engage and disengage the unit. Please note this durable rubber insulated metal clutch cable is sold individually. Make sure to refer to the appropriate diagrams of your model for the correct location and application of this component.
Pulley – Part Number: 1501115MA
No Longer Available
Pulley
Part #1501115MA
This is an authentic manufacturer-sourced component from the Murray manufacturer. The friction pulley is constructed of durable metal, and is made for use with many snowthrower machines. The friction pulley is secured onto the swinging l.f. plate (yz), assisting with the movement of the snowblower through the rotation of the friction disc. This component also helps the drive belt transmit force to related components. This item is sold individually. A wrench and a screwdriver are often necessary for the replacement.
Kit accm upgrade – Part Number: 71015
No Longer Available
Kit accm upgrade
Part #71015
Clamp - Casing – Part Number: 711682
No Longer Available
Clamp - Casing
Part #711682
Screw – Part Number: 25X201
No Longer Available
Screw
Part #25X201
Motor box frame – Part Number: 1501049E549
No Longer Available
Motor box frame
Part #1501049E549
Lever assy clutch a – Part Number: 337815E701
No Longer Available
Lever assy clutch a
Part #337815E701
Grommet – Part Number: 148MA
No Longer Available
Grommet
Part #148MA
Grommet eye bolt .40
Auger (a2) not 29 – Part Number: 760599E701
No Longer Available
Auger (a2) not 29
Part #760599E701

Common Symptoms of the C950-52411-0

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Refurbishing for next winter season
8 of 14 people found this instruction helpful.
  • Kenneth from ALDAN, PA
  • Easy
  • 30 - 60 mins
  • Socket set, Wrench set
I replaced the auger belt and drive belt by separating the machine. The auger belt alone can be replaced by simply tilting without separating but the drive belt can not. So after separating the machine, I removed the auger belt by loosening the belt guide and removing the tensioner. I then loosened the nut that secures the drive wheel. This gave me enough play to remove the drive belt from the drive tensioner and then wiggle it from the drive wheel and out of the machine. Install by wiggling the belt back behind the drive wheel until you can slip it on the wheel. pull tensioner pulley out of the way to get the belt on the top pulley. Tighten the nut to secure the drive wheel. Reconnect the machine at the bottom of the auger housing and replace the auger belt, tensioner, and belt guide. Complete by replacing the upper bolts that hold the two parts together. I have not replaced the friction wheel as of yet. My process took 30 - 45 minutes for both belts.
Was this helpful?
Thank you for voting!