C950-52060-2 ((1696315-00)(2012)) Craftsman Snow Blower - Overview

Diagrams for C950-52060-2

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Screw, 3/8 - 16 X 1-1/4 Taptit – Part Number: 75246GS
$7.95
Special Order
Engine Muffler Guard Screw – Part Number: 699854
$6.95
Special Order
Engine Muffler Guard Screw
Part #699854
It is a genuine item that is supplied directly from the original equipment manufacturer for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. This replacement screw is generally used to secure the muffler guard, for correct application make sure to check appropriate diagrams of your model. It is a high-quality Torx screw which is sold individually.
Guard-Muffler – Part Number: 797003
$83.95
Special Order
Guard-Muffler
Part #797003
Screw, 1/4-15x1 – Part Number: 706516
$6.95
Special Order
Screw, 1/4-15x1
Part #706516
Knob, Handle – Part Number: 194289GS
No Longer Available
Knob, Handle
Part #194289GS
Chute – Part Number: 1687864
No Longer Available
Chute
Part #1687864
Kit, single stage chute rotation
Plate – Part Number: 708695
No Longer Available
Plate
Part #708695
Washer-flat – Part Number: 708699
No Longer Available
Washer-flat
Part #708699
Spacer – Part Number: 708696
No Longer Available
Spacer
Part #708696
Chimney – Part Number: 707849
No Longer Available
Chimney
Part #707849
Gear, 65t, 8p – Part Number: 706509
No Longer Available
Gear, 65t, 8p
Part #706509
Hold down-gear – Part Number: 708698
No Longer Available
Hold down-gear
Part #708698

Common Symptoms of the C950-52060-2

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Scraper bar and flight worn past wear limit.
9 of 10 people found this instruction helpful.
  • Duane from RICHFIELD, MN
  • Really Easy
  • 30 - 60 mins
Removed scraper bar and support. Removed flight paddles. Several retaining screws were seized requiring WD-40 and vice grips for removal. Torx sockets stripped out due to threads being seized. Hex head cap screws would be better for both scraper bar and flight papples.once the screws were removed I used a tap to clean the threads and appl ied lubricant to minimize future corrosion. Three of the four lock nuts for the scraper bar were either not included or lost in shipping due to poor packing requiring me to purchase replacements.
Overall, the job took longer than it should have due to the additional time required to remove seized screws and acquire replacement lock nuts.
Was this helpful?
Thank you for voting!
wetn wele except having to go get a star driver to get old one off.. treplacmetn parts werre all allen wrench so went well
1 of 4 people found this instruction helpful.
  • John from BOUNTIFUL, UT
  • Very Easy
  • 15 - 30 mins
  • Wrench (Adjustable)
Star wrenched off old blades.. removed scraper with Allen's and adjustable wrench. replaced scraper first then attached the blades and tightened.. Whalla.. done ready for another foot or snow removal same day.
Was this helpful?
Thank you for voting!