My Orders
C3555 (Type 1) Porter Cable Compressor - Overview
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$22.04
Special Order
Ball Valve
Part #N072023
This genuine OEM replacement drain valve is designed for use with a variety of DeWalt air compressors. Made from durable metal, it allows you to easily open or close the valve with just a quarter turn, making tank draining quick and hassle-free. If your current valve is leaking or hard to turn, this part is a simple fix to keep your compr...Read moreessor running efficiently. It’s sold individually, and installation is straightforward—just be sure to check your model’s manual for proper fit and instructions.
Read less
No Longer Available
Label Hot Surface Tr
Part #N008806
No Longer Available
Nut .375-16 UNC-2B H
Part #SSF-8080-ZN
No Longer Available
Dip Stick
Part #A01978
This is an authentic Porter Cable replacement part manufactured for use with air compressors. This dipstick is used to measure the oil inside the pump, and to seal the oil filler. The dipstick is sold as an individual replacement part.
No Longer Available
Valve Check 3/4 NPT
Part #A19996
This is an authentic OEM authorized part which is specially designed for use with Porter Cable air compressors. Check valve lets pressurized air flow into the tank and prevents it from flowing back into the pump. When replacing this part make sure to unplug the air compressor and release the air from the tank. Please make sure to refer to...Read more the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality valve is made of durable metal and is sold individually.
Read less
No Longer Available
Fitting 90DEG Elbow
Part #SSP-537
No Longer Available
Elbow 1/4 NPT X 3/8
Part #SSP-6429
No Longer Available
Plug Pipe 3/8 - 18 N
Part #SSP-486
$7.44
Special Order
ISOLATOR 3 POINT MOU
Part #ACG-19
$104.71
In Stock
ASSY VALVE PLATE
Part #Z-AC-0032
This replacement valve plate assembly is a high quality item designed for use on Craftsman air compressors. It is a genuine manufacturer sourced item that is used to control the airflow into the cylinder. Once the piston starts traveling up, the reeds on the valve plate open and air is sent into the air tank. Overtime the reeds will get w...Read moreorn eventually requiring valve plate replacement. One metal valve plate with reed valves and two rubber seals are included in this assembly. When replacing this valve plate assembly it is also a good time to replace the head gaskets which are sold separately. You will need a wrench set to complete this repair.
Read less
$7.44
Special Order
ASSY FASTENER
Part #ACG-408
This assembly fastener is supplied directly from the original equipment manufacturer. The screws are constructed of metal, and are compatible with many compressor machines. This part is often used to secure the compressor shroud. It is recommended to refer to specific manual and diagrams for repair instructions. This part is sold individu...Read moreally. Purchasing spare screws is also encouraged, as they can wear out over time and regular use. A hex key and a screwdriver are helpful in the removal and replacement.
Read less
$7.44
In Stock
ORING P/L HEAD
Part #ACG-45
O-rings are made to contain thousands of PSI pressure by creating a seal between two or more parts. O-ring measurements are defined by the inside diameter and the thickness. rnrnThere are many causes for O-Ring failure. The most common among power tools are: • Extrusion and Nibbling - The O-ring has ragged, tattered edges. ...Read moreThese are commonly caused by pressure spikes which shear off tiny "bites" from the o-ring, or caused by clearance gaps. • Abrasion - One or both sides of the o-ring appear rough and slightly flattened. Commonly caused by a contact surface that it too rough, contains grit or is too smooth to allow lubrication. • Over Compression - The O-ring is flattened on both sides and may have a "ring" split along its length. Commonly caused by excessive pressure or heat. • Heat Hardening - The O-ring has a pitted or cracked surface, and is often flattened on both sides. Caused by temperature exceeding o-ring capacity. • Weather/Ozone Cracking - The O-ring is covered in small surface cracks. Caused by exposure to ozone, UV rays and air pollution. Excessive seal stretching (greater that 5%) causes similar cracking.
Read less
Common Symptoms of the C3555
How this model fails, and the parts that fix it.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More