C300 (UT-20775) Homelite Trimmer - Overview

Diagrams for C300

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Throttle Interlock – Part Number: PS01128
$8.95
Special Order
Throttle Interlock
Part #PS01128
25cc Cylinder Kit – Part Number: UP07145A
$56.95
Special Order
25cc Cylinder Kit
Part #UP07145A
Screw- Hex Cap – Part Number: 80295
$5.95
Special Order
Screw- Hex Cap
Part #80295
String Head Assembly – Part Number: 000998265
$111.64
Special Order
String Head Assembly
Part #000998265
Genuine OEM replacement part, This item is sold as a kit. This is the complete Stringhead Assembly for the Trimmers shown below. It is a dual line head. To install this part, slide it on the spindle or shaft of the Trimmer The kit contains two Spool Retainers to secure the Stringhead. The red one has left hand threads and the black one has right hand threads. It will depend on the model you have, on which Spool Retainer to use. The cutting line diameter used in this Stringhead is .095
Clamp- Wire – Part Number: 690765001
$5.95
Special Order
Clamp- Wire
Part #690765001
This is a genuine Homelite replacement part designed for use with String Trimmer and Blowers. The purpose of the wire clamp is to secure the fuel line to the filter. It is made out of metal and it is sold individually. To replace it you may need pliers.
Screw (st-155) – Part Number: 82538
$5.95
Special Order
Screw (st-155)
Part #82538
A genuine replacement part which is supplied directly from the original equipment manufacturer for use with Homelite and Ryobi handheld lawn and garden equipment. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality screw is made of durable metal and is sold individually.
Lock Washer (BC) – Part Number: 83009
$6.95
Special Order
Lock Washer (BC)
Part #83009
Driveshaft Housing (Upper) – Part Number: UP05136A
$59.95
Special Order
Baffle-Air – Part Number: PS00326
$5.95
Special Order
Baffle-Air
Part #PS00326
Grip-starter (yellow) – Part Number: PS01200
$5.95
Special Order
Grip-starter (yellow)
Part #PS01200
This is a genuine replacement part sourced directly from the manufacturer. The starter grip is commonly found in Homelite blowers and trimmers. This part is made of high-quality plastic, and it attached to the end of the rope in the starter assembly to provide the user with a secure grip for pulling. This item is sold as an individual replacement part.
Starter Assembly-complete – Part Number: UP02962A
$62.95
Special Order
Starter Assembly-complete
Part #UP02962A
This is a genuine replacement part sourced directly from the manufacturer. The starter assembly is commonly found in Homelite trimmers. This is a complete assembly, including the starter housing made of high-quality plastic, the starter grip and rope, spring, pulley, and air baffle. It is used to trigger ignition in the machine. You may require a screwdriver when replacing this item.
Trigger-throttle – Part Number: UP03207A
$5.95
Special Order
Trigger-throttle
Part #UP03207A
This is an original part from Homelite for use with Trimmers. The throttle trigger allows you to control engine speed. The most common reason for replacing the trigger is if it is damaged or not engaging the throttle properly. This part is sold individually. The tools that you will need to replace the throttle trigger is a T-25 Torx head screwdriver and a flat-head screwdriver.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
fuel line leaks
15 of 35 people found this instruction helpful.
  • john from Massena, NY
  • Really Easy
  • Less than 15 mins
  • Screw drivers
As others have said , simply remove old tank and tubes and replace in reverse order., being sure tube from filter goes to primer bulb.
Was this helpful?
Thank you for voting!
No directions on how the line went counterclockwise or clockwise
4 of 6 people found this instruction helpful.
  • tom from LINCOLN PARK, MI
  • Really Easy
  • 15 - 30 mins
Put the head on the line that they sent was too thick and brittle and was constantly breaking so I put the line that I have always used and it worked perfectly
Was this helpful?
Thank you for voting!