C2002 (Type 5) Porter Cable Compressor - Overview

Diagrams for C2002

See every part. Know exactly what you need.

Parts for the C2002

Label Hot Surface Tr

Part #N008806

Carbon Brush Set-2 Pack

Part #Z-D27196

Bracket

Part #N015853

$77.89

Connecting Rod Assembly

Part #N036518

This genuine OEM replacement kit is designed for use with select air compressors and includes essential components to restore proper function. The kit comes with a piston rod, compression ring, cylinder sleeve, and bearing—ideal for repairing worn or damaged internal parts. Please note that this kit does not include the valve plate, head ...Read more

Read less

Check Valve

Part #D27022

Screw

Part #D29132

Label

Part #N034746

$7.44

TIRE GAUGE

Part #N003790

POWER CORD

Part #N137875

This is an authentic Porter Cable replacement part manufactured for use with air compressors. This three wire cable had terminals at the end of the wires to make installation easier. The cable is sold individually.

$12.20

DRAIN VALVE

Part #N286039

When using an air compressor, moisture naturally builds up inside the tank as air is compressed. If this water isn’t drained regularly, it can lead to internal rust and damage over time. That’s where the drain valve comes in—it allows you to release the built-up water and keep your tank in good condition. Located at the bottom of the tank...Read more

Read less

$47.91

BELT TIMING

Part #AC-0815

This is an OEM part sourced directly from the manufacturer. The belt is commonly found in Craftsman air compressors. This part is made of flexible rubber, and is used to transfer power between the piston and the pump assembly. Over time, it may become cracked and brittle, requiring replacement. You may need an Allen wrench or hex key when replacing this part. This item is sold individually.

$30.70

QUICK CONNECT

Part #A16182

This is a genuine replacement part manufactured for use with air compressors. The special quick connect threads into the regulator manifold and is used to link the air compressor hose. This quick connect is available as an individual replacement part, please note two may be required.

Common Symptoms of the C2002

How this model fails, and the parts that fix it.

Air leak

Fixed by
these parts

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Worn piston rod and sleeve

7 of 12 people found this instruction helpful.

Donald from BRYAN, TX
Really Easy
30 - 60 mins
Nutdriver, Screw drivers

Disassemble plastic housing around compressor unit using appropriate tools. Remove the four bolts from the compressor head using a 5/16 nut driver. Carefully remove head assembly including airline. Remove bolt through rod bearing with Allen wrench.

Reassemble with new rod and piston assembly. Best to use blue locktite on bolt ... Read more

Read less

Was this helpful?

Can't find this special screw used on many housings etc

4 of 6 people found this instruction helpful.

Tim from Tucson, AZ
Very Easy
15 - 30 mins

Actually don't like using Torx bits because they are hard to center deep in the channel. I had misplaced these forcing me to order replacements.
My plan is to insert Torx bits before screwing in and using jb weld to secure the bit to the screw, giving me a hex head. Can't find this special screw with a hex head. This screw is called ... Read more

Read less

Was this helpful?

The compressor was getting air

4 of 8 people found this instruction helpful.

Linda from CARO, MI
Really Easy
30 - 60 mins
Screw drivers, Socket set, Wrench set

Put the seal in and it ran like a champ. No vacuum leak and it now runs again!

Was this helpful?