C2000 (Type 0) Porter Cable Compressor - Overview

Sections of the C2000

[Viewing 3 of 3]

Exact Part matches for your search term

[Viewing 1 of 1]

800MHZ CDMA 1XRTT CELL PHONE,

This part number matches the current model number C2000

PartSelect #: PS17239635

Manufacturer #: C2000

Parts for the C2000

[Viewing 12 of 47]

Gauge 1.5 300PSI 1/8

PartSelect #: PS10116089

Manufacturer #: GA-373

Cord Power-SJOW 14GA

PartSelect #: PS10115957

Manufacturer #: D26616

Tube Isolator

PartSelect #: PS10116580

Manufacturer #: N136310

SCREW #8-32X.375/.34

PartSelect #: PS12509515

Manufacturer #: SUDL-9-1

$5.95

NIPPLE

PartSelect #: PS12529076

Manufacturer #: N053094

$5.95

SCREW

PartSelect #: PS12512659

Manufacturer #: A19123

$5.95

Handle Support Non-S

PartSelect #: PS10044147

Manufacturer #: D20492

TUBE SEAL

PartSelect #: PS12522478

Manufacturer #: N044359

This replacement tube seal is designed to prevent air leaks and maintain efficient compressor performance. Sold individually, it fits securely onto the outlet tube that connects to the head of the com...

$5.95

Valve

PartSelect #: PS17000937

Manufacturer #: D20114

This safety valve is a genuine replacement part manufactured for use with air compressors. If the compressor's pressure switch malfunctions, and does not turn the motor off when the amount of pressure...

$13.48

BUSHING REDUCER 1/8-

PartSelect #: PS18997482

Manufacturer #: SSP-6021

Switch Pres 4Port 12

PartSelect #: PS10108616

Manufacturer #: 5140112-33

LABEL

PartSelect #: PS10049034

Manufacturer #: N008800

Questions And Answers for C2000

Be the first to ask our experts a question about this model!

Common Symptoms of the C2000

[Viewing 1 of 1]

Air leak

Fixed by
these parts

Show All

Installation Instructions of parts on the C2000

[Viewing 2 of 2]

Worn piston rod and sleeve

Disassemble plastic housing around compressor unit using appropriate tools. Remove the four bolts from the compressor head using a 5/16 nut driver. Carefully remove head assembly including airline. Remove bolt through rod bearing with Allen wrench.

Reassemble with new rod and piston assembly. Best to use blue locktite on bolt through rod bearing when reassembling. Make sure to torque all bolts to specs listed.

Parts Used: