BM80919E Homelite Pressure Washer - Overview

This is a genuine OEM replacement kit. This kit is threaded into the pump assembly. It is connected to the Chemical Siphon Tube that is placed in a container that contains the cleaner you are using. The O-Rings are placed on the Bronze nozzle, then the spring will go in first, then the steel ball, then thread in the nozzle.

This is an authentic OEM sourced component which is specially designed for Homelite pressure washers. The purpose of the pump is to creates a high volume pressure, supplying water through the high-pressure hose, to the gun, and out through the pressure wand. Unfortunately, over time parts may wear out and begin to fail eventually requirin...Read moreg a replacement. Keep in mind this high-quality metal body brass head pump is sold individually. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this item.

(25 ft., 3000 psi) This water hose is for pressure washers. Water hose carries water from the pump to the spray wand. Wear work gloves to protect your hands when installing this part.

Genuine OEM replacement part, this item is sold individually. This is the part on the pressure washer that you connect the hose to. The hose then connects to the handle assembly and spray wand.

This is an authentic manufacturer made replacement part which is specially designed for use with Ryobi pressure washers. The detergent tank cap seals the detergent tank to ensure the soap stays contained as well as keep debris from getting in the tank. The cap is made of plastic and is sold individually. No tools are required for installation, simply screw on the cap firmly to the detergent tank to secure.

This rubber wear pad mounts to the frame of select gas pressure washers. It helps reduce vibration, supports the machine, and keeps the metal frame from scratching the ground. The pad measures about 1.5 inches long, 1.2 inches wide, and 1.6 inches high. Replace it if it is cracked, torn, flattened, loose, or missing. Use the complete pres...Read moresure washer model number to guarantee the proper fit. Turn off the engine, let it cool, and disconnect the spark plug wire before installation.

This is an authentic Honda replacement part that is sourced from the original manufacturer to be used with small engines that power pressure washers. The special label attaches to the engine and is used to identify the engine's brand and to improve the look of the engine. This item is available as an individual replacement part.