BFT082RZ (Type 3) Makita Screwdriver - Overview

This is an authentic replacement part manufactured for use with Makita drills/drivers. The flat washer is commonly used to provide a wider surface area for the pressure put on the spring ring by the compression spring on the spindle. This flat washer is available as an individual replacement part, please see model diagram for associative parts.

This is an OEM part sourced directly from the manufacturer. The steel ball is commonly found in Makita drills and screwdrivers. This part may be found in different locations in the machine, depending on model. Please be aware that there are different steel balls used in the machine. Refer to the parts diagram to be sure of ordering th...Read moree correct part. You may require a screwdriver when replacing this part. It is advisable when removing multiple parts to keep careful track of their order so they can be reassembled correctly. This item is sold individually.

This is a genuine replacement part sourced from the original manufacturer for use with screwdrivers, drills, saws, and nailers made by Makita. The steel ball goes between two cams and is made of metal. An allen wrench might be required during the replacement of this item. It will require replacing if it becomes lost since it is a very small part. This is available as an individual replacement part.

This part is available as an individual replacement. The compression spring is made of metal and attaches to the switch lock. When replacing this item a screwdriver and a set of pliers may be needed. Over time this part may break or become lost and will need to be replaced. This item is an OEM sourced directly from the manufacturer for us...Read moree in chop saws, cordless drills, and hazardous location screwdrivers made by Makita.

Genuine Makita replacement part, this item is sold individually. This part is used on the tools listed below, to contain all of the part that are attached to the front end of the tool. Such as the Chuck assemblies on the the Impact Drivers and the Spindle Assemblies on the Screwdrivers.

The ring spring goes next to the flat washer and is made of metal. It is priced as an individual replacement part. This genuine item is supplied by the original equipment manufacturer for use with Makita drills, impact drivers, and screwdrivers. A set of pliers may be necessary during the installation of this part. It may become broken and will need to be replaced.

This is a Genuine OEM replacement part used on Makita drills and drivers. This is a metal spring and it is sold individually. Over time springs may lose its tension and may not function as intended. If this part is lost or damaged it must be replaced. To replace this spring a pair of pliers is needed.