This is the replacement door bin or door tray for your refrigerator. It is made of white and clear plastic and is approximately 15 inches wide, 5 inches tall, and 8 inches deep. The door bin attaches ...
This genuine Bosch water filter is used to help reduce contaminants in the water supply including chlorine and lead. The water filter measures approximately 2" diameter and 9” long. It is recommended ...
This sensor monitors critical operating conditions to ensure accurate system performance and safe operation. It helps regulate key functions such as temperature or moisture levels, restoring reliabili...
This fan motor is a replacement drive component designed to power airflow movement during operation. It helps regulate temperature and ventilation and is commonly replaced when airflow weakens or abnormal noise develops.
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bruce
November 4, 2022
Where is the water inlet valve located on this fridge?
For model number B26FT50SNS
Hi Bruce,
Thank you for your question. The water inlet valve/magnet will be found behind the refrigerator at the bottom in the area where the compressor is. The part number listed under your model number for the water inlet valve/magnet is PS8731061. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
Hello Margaret, thank you for your question! The water filter for your model is part number PS16556076. If you need help placing an order, customer service is open 7 days a week!
How to access ice in ice maker. How to remove cover?
How to remove shelf attached to side of ice maker
For model number B26FT50SNS
Hi Maggie, thank you for reaching out. To access the ice, make sure to shut off the water supply to the appliance a few hours before disconnecting the ice maker. Press the release button and remove the ice cube container. Then, press the button for 3 seconds (LED lamp is off) behind the ice cube container - the ice maker is deactivated. Empty and clean out the ice cube container. Push the ice cube container all the way back onto the supports until it locks into position. Then press the button again for 3 seconds to reactivate the ice maker. To remove the glass shelf, lift up and pull the shelf toward you. Unhook and then remove the shelf. We hope this helps.
Was this helpful?
Thank you for voting!
Matthew
November 30, 2024
Why won't fridge get cold
For model number B26FT50SNS
Hello Matthew, thank you for your inquiry. There are several causes for a refrigerator that doesn't cool, including dirty condenser coils, poor ventilation, and worn Door Gasket PS8701626. You can use a Cleaning Brush PS1817576 to clean the condenser coils. We hope this helps.
I mistakenly ordered the wrong part number online and the filter was too big. I called Part Select and the gentleman knew the correct part number and sent it. I also received directions for returning the incorrect part.
