Models
>
B22CT80SNS
B22CT80SNS Bosch Refrigerator - Overview
Models starting with B22CT80SNS
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
SEAL-DOOR
PartSelect #: PS9492801
Manufacturer #: 00713448
$391.40
In Stock
Order within the next 1 hr and 17 mins and your part ships today!
Ice and Water Filter Cartridge
PartSelect #: PS10058838
Manufacturer #: 12004484
With its advanced filtration system, this water filter is capable of removing impurities and contaminants from your water, including chlorine, lead, and other harmful substances. This ensures that you...
$100.12
In Stock
Order within the next 1 hr and 17 mins and your part ships today!
CONTROL UNIT
PartSelect #: PS9492885
Manufacturer #: 00798467
$370.02
In Stock
Order within the next 1 hr and 17 mins and your part ships today!
VALVE
PartSelect #: PS9492759
Manufacturer #: 00631861
$304.26
In Stock
Order within the next 1 hr and 17 mins and your part ships today!
DIVIDING WALL
PartSelect #: PS10061135
Manufacturer #: 00772082
$358.22
In Stock
Order within the next 1 hr and 17 mins and your part ships today!
DREYER
PartSelect #: PS8730100
Manufacturer #: 00644085
$92.95
In Stock
Order within the next 1 hr and 17 mins and your part ships today!
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The gasket seals on the two refrigerator doors had deteriorated and the single freezer drawer gasket had begun to deteriorate.
- Prior to ordering the gaskets, I went online to make sure the installation was something I could readily do—it is really easy.
- When I received the gaskets, I laid them out on a flat surface, but as per the product description, they had become distorted in the shipping container. At first I thought one was severely distorted, but it was turned “inside out.”
- I followed the directions to use a hair dryer to heat the rubber material until it returned to its original shape: about 15 minutes for each gasket.
- With a little effort, the old gaskets pop out and the new ones pop into a groove (I ran my fingers firmly over the installed gaskets to make sure they were securely installed.).
- Everything appears to fit perfectly: problem solved!
- When I received the gaskets, I laid them out on a flat surface, but as per the product description, they had become distorted in the shipping container. At first I thought one was severely distorted, but it was turned “inside out.”
- I followed the directions to use a hair dryer to heat the rubber material until it returned to its original shape: about 15 minutes for each gasket.
- With a little effort, the old gaskets pop out and the new ones pop into a groove (I ran my fingers firmly over the installed gaskets to make sure they were securely installed.).
- Everything appears to fit perfectly: problem solved!
Parts Used:
-
James from NICHOLASVILLE, KY
-
Difficulty Level:Really Easy
-
Total Repair Time:1- 2 hours
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!