This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
This temperature sensor is for refrigerators.
The temperature sensor senses the temperature inside the refrigerator and sends information to the electronic control.
Unplug the refrigerator and s...
If your refrigerator or freezer is too warm, or making noises, you may need to replace the fan blade. The fan blade attaches to the evaporator motor, which is in the freezer section, to help circulate...
The compressor run capacitor keeps the refrigerator motor running smoothly. Be sure to unplug the appliance before installation and verify the part number for compatibility.
Need more room in your freezer? This shallow wire shelf gives you extra space to organize frozen foods and makes it easier to find what you need. It’s sturdy, coated to resist wear, and helps cold air...
Is your refrigerator not cooling like it used to? The Whirlpool Refrigerator Temperature Sensor might just be what you need! This is a dependable thermistor, which plays an important role in maintaini...
We understand the frustration of a broken fridge shelf; your food gets disorganized, and the cool air isn't distributed evenly. Here to solve your problem is the Whirlpool Wire Shelf, a high-quality, ...
$168.49
In Stock
Questions And Answers for AZF33X16DW01
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Chris
November 5, 2022
My freezer is at 20degF . Unplugged reset it it got down to about 5degF then rose back up to 20. Is the capacitor bad?
For model number AZF33X16DW01
Hi Chris, thank you for reaching out. According to our research on the model, the problem appears to be with the Capacitor, part number PS11753490. If that does not help then the issue is likely to be with the Temperature Sensor, part number PS11753996. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair!
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
Unplug the fridge then wheel the refrigerator out to where you can get to the back - you will probably have to disconnect the ice maker water hose. Using the nut driver remove all the screws from the lower panel on the fridge. You will not have to remove the water hose connection just move the panel around a little. Look on the left side (facing the back of the fridge) you will see the capacitor held onto the compressor with a spring clip. Just pull the clip toward you and that will free the capacitor. Pull up on the capacitor and that will unplug it from the compressor. Be careful not to touch the two poles on the old capacitor. Capacitors store electricity and it could give you a jolt. I used electrical tape to insulate the poles and then threw it away. Plug in the new capacitor- re-hook the clip, reinstall the back panel, plug it in and verify that the fridge is working. Hook your water hose back up and move it back into place and you are done.
