This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are mos...
The lower door closing cam is used in refrigerator doors, it can be located on the fresh food side or the freezer side. It helps hold the door open. This cam is made out of plastic, so it might crack ...
The Door Cam is a black plastic part which helps the door pivot shut while keeping the door and hinge in proper alignment. Lubricating this part upon installation may help it move easier. It attaches...
This refrigerator door shelf bin, also known as the door bin, or sometimes just a "bucket", is an authentic manufacturer-certified part made of white plastic and is easy to install. It is used to hold...
This OEM, clear convertible meat drawer can be used to store meats or vegetables and is designed for the lower portion of your refrigerator, generally. It has its own cold air duct to allow cold air f...
Note: This valve has been updated by the manufacturer and no longer includes the removable pre-filter bracket connector. It must be ordered separately; part number WPW10445062.
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Paula
May 15, 2023
On The Refrigerator side * left side wall has water - like Sweat beads.
I checked the seal * is good. I unplugged for 1 hr then plugged back in / RESET ?? THERE HAS BEEN SEVERAL POWER OUTAGES IN THE LAST TWO MONTHS. I READ SOMETHING ABOUT AN OUTAGE MIGHT AFFECT THE FRIDGE. THE SWEATING IS ON THE MIDDLE LEFT SIDE OF THE REFRIGERATOR , THERES THE RETURN VENT * I SEE NO RESET BUTTONS * WHAT DO I DO TO FIX FRIDGE TOO WARM / THE FREEZER WASNT FREEZING ITEMS EITHER. AFTER UNPLUGGING I SEE A LIL ICE BUILD UP IN FREEZER , OH AFTER I TURNED THE COLDER CONTROL UP TO COLDEST. FREEZER SEEMS TO BE GETTING COLDER SINCE UNPLUGGING. THE TWO LIGHT BULBS WERE VERY HOT, I YOOK BOTH FROSTED 40 W LITE BULBS OUT. IVE JUST BEEN ABLE TO PULL THE FRIDGE OUT FROM THE WALL TO SEE IF THERE ARE ANY CONTROL BUTTONS / LOOKS LIKE MAYBE AT THE BOTTOM OF FRIDGE MABE THE PANEL ?
For model number ASD2522WRS01
Hello Paula, Thank you for asking. Condensation inside a refrigerator can be caused by a faulty cooling process High Temperatures or Low Temperatures. If the temperature is set correctly, it could indicate the Thermostat Assembly Part #: PS11739232 is faulty and may need to be replaced. We hope this helps!
Our temperature keeps fluctuating and not staying cold. Fan kicks up when turned up but why isn’t it staying constant in both fridge and freezer
For model number ASD2522WRS01
Hello Abbie, thank you for reaching out. Based on our research, the issue might be caused by a faulty temperature control thermostat, part number PS11739232. It regulates the temperature inside the refrigerator. Checking the thermostat for continuity using a multimeter might help. Good luck with the repair!
I searched the model number for my Whirlpool refrigerator on the internet and partselect.com came up so I clicked on it. The site asked for my model number which I typed in and there it was...a picture of my refrigerator in full detail and very well diagramed and labeled. I found the number of the parts I needed, added them to my cart and paid. In a few days (2 I think which is an awsome delivery time) the parts were iin my front door step, very well packaged and in imaculate condition. I took them out of the box and installed them in less than 15 minutes. A parts internet order and repair has NEVER gone as quick and easy as this did. Thankyou Partselect for an awsome job and awsome website and even more awsome delivery time. Very happy and impressed with your service. Keep up the outstanding work!!!!!!
Thanks to the pictorial diagram, I was able to order correct parts. It was just a matter of removal of broken parts and replacing them. Ice maker now working and air is no longer getting into freezer which was freezing up ice maker. Thanks for timely delivery, now I am able to use ice dispenser, which I haven't used for long time. Thanks
