AN935H Makita Nailer - Overview

This is an authentic Makita replacement part that has been sourced from the original manufacturer to be used with nibblers, shears, nailers, and rebar cutters. The bolt is used with different types of machines and the application of the bolt can vary based on the model of the equipment. It is recommended to review your model's part diagra...Read morem to confirm the parts usage and compatibility. This bolt is sold as an individual replacement part.

This is an authentic replacement part manufactured Makita power tools. The flat washer is commonly used to disperse pressure across a wider area on a part assembly that is applied by a nut or bolt. This flat washer is used with multiple types of power tools, please see model diagram for part location and usage. The flat washer is sold as an individual replacement part.

This replacement flat washer is a genuine OEM part, not an aftermarket equivalent. It is specially manufactured for use with Makita power tools. This standard hardware has multiple applications depending on your tool. For correct location and use please refer to appropriate diagrams. This metal washer is sold individually.

This is an authentic manufacturer sourced replacement part. It is commonly used on a variety of Makita power tools. It is used to distribute the pressure evenly between two connected parts. Since this washer is a standard hardware that has multiple applications, it is recommend to check appropriate diagrams for correct location and use of it. This part is made out of metal and it is sold individually.

It is an identical replacement for a missing or a damaged spring pin that is used to secure the slider. To ensure the exact location and the correct application of this hardware, refer to the appropriate diagrams for your model. Keep in mind this high-quality spring pin is made of durable metal and is sold as an individual item. This auth...Read moreentic manufacturer-sourced component is specially designed for Makita power tools.

This replacement urethane ring is a high quality item that is specially designed for Makita nailers. The purpose of this item is to create an air-tight seal for the pushing lever, for correct application make sure to check appropriate diagrams of your unit. Over time rings and seals will shrink, become brittle and crack eventually requiring a replacement. It is made from durable rubber and it is sold individually.

O-rings are designed to contain thousands of pounds of pressure by creating a seal between two or more parts. O-ring measurements are defined by the inside diameter and the thickness. There are many causes for O-Ring failure, such as pressure, friction, temperature or chemicals. The most common are: • Extrusion and Nibbling...Read moreu> - O-ring has ragged, tattered edges. These are commonly caused by pressure spikes which shear off tiny "bites" from the o-ring, or caused by clearance gaps. • Abrasion - One or both sides of the o-ring appear rough and slightly flattened. Commonly caused by a contact surface that is too rough, contains grit or is too smooth to allow lubrication. • Over Compression - O-ring is flattened on both sides and may have a "ring" split along its length. Commonly caused by excessive pressure or heat. • Heat Hardening - O-ring has a pitted or cracked surface, and often is flattened on both sides. Caused by temperature exceeding o-ring capacity. • Weather/Ozone Cracking - O-ring is covered in small surface cracks. Caused by exposure to ozone, UV rays and air pollution. Excessive seal stretching causes similar cracking.

Read less