Models > AKT3040WW-PAKT3040WW1

AKT3040WW-PAKT3040WW1 Amana Range - Overview

Sections of the AKT3040WW-PAKT3040WW1

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Radiant Surface Burner Element 1500W – Part Number: W10823699
Radiant Surface Burner Element 1500W
★★★★★
★★★★★
(1)
PartSelect #: PS11764909
Manufacturer #: W10823699
This surface element is made for under glass set-ups and supplies the heat to a cooking area on top of the range. It has an outside diameter of approximately 7 inches (1500 watts), and is a genuine OE...
$136.11
  In Stock
Appliance Scraper – Part Number: WA906B
Appliance Scraper
★★★★★
★★★★★
(1)
PartSelect #: PS408570
Manufacturer #: WA906B
Use this scraper for your ceramic/glass cooktop. It has a retractable blade and is an all-purpose tool for cooktops, mirrors, windows and tile. Use it to also remove paint, paper, dirt, stickers and more.
$13.76
  In Stock
Cooktop Cleaner – Part Number: W10355051
Cooktop Cleaner
★★★★★
★★★★★
(1)
PartSelect #: PS3492527
Manufacturer #: W10355051
Sold individually.
  No Longer Available
CLEANER – Part Number: W10336909
CLEANER
★★★★★
★★★★★
(2)
PartSelect #: PS3418530
Manufacturer #: W10336909
$14.27
  In Stock
Surface Infinite Switch – Part Number: WP74011243
Surface Infinite Switch
PartSelect #: PS11744436
Manufacturer #: WP74011243
$155.14
  Special Order
Screw – Part Number: WP488234
Screw
PartSelect #: PS11742713
Manufacturer #: WP488234
This screw is sold individually. Size: 8-32 x 1/4 inch.
$11.65
  In Stock
Dual Element Infinite Control Switch – Part Number: 12002422
Dual Element Infinite Control Switch
PartSelect #: PS2003805
Manufacturer #: 12002422
$152.59
  In Stock
Surface Ribbon Element with Limiter - Small – Part Number: WP32082801
Surface Ribbon Element with Limiter - Small
★★★★★
★★★★★
(1)
PartSelect #: PS11741007
Manufacturer #: WP32082801
This is a 1200 watt / 240 volt surface element.
  No Longer Available
SCREW – Part Number: 74009538
SCREW
PartSelect #: PS2086954
Manufacturer #: 74009538
$22.61
  Special Order
ELMNT-SURF – Part Number: W10823708
ELMNT-SURF
PartSelect #: PS11764913
Manufacturer #: W10823708
This is a 2000 watt / 240 volt surface element.
$252.22
  In Stock
KNOB-DUAL – Part Number: 31926604W
KNOB-DUAL
PartSelect #: PS2034012
Manufacturer #: 31926604W
  No Longer Available
HARNESS, CONDUIT – Part Number: 31939501
HARNESS, CONDUIT
PartSelect #: PS2034117
Manufacturer #: 31939501
  No Longer Available

Questions And Answers for AKT3040WW-PAKT3040WW1

Be the first to ask our experts a question about this model!

Common Symptoms of the AKT3040WW-PAKT3040WW1

[Viewing 1 of 1]
Element will not heat
Fixed by
these parts
Fixing Fixing Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Burner switch failed (full on, even in "lo")
Managed to reach down from the top, unscrew the old part, so I could remove from under the cooktop. Easy to trace the wires, and map them to the (slightly different) replacement. Works like a charm, and new part appears to be of higher quality than the old one.
Parts Used:
Dual Element Infinite Control Switch
  • Stephen from Seneca, SC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers
21 of 33 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Small burner full hot all the time.
TURNED OFF POWER TO STOVE Removed 5 Knobs, 2 screws that held bad switch.
Removed 4 screws and lifted panel up and forward to expose switches. Adjusted spring tension on knob stem to hold knob ( stem in new switch slightly smaller) removed wire from defective switch one at a time and fastened to new switch in sequence. Reassembled and turned power on. Defective switch had stuck contacts making it full hot.
Parts Used:
Surface Infinite Switch
  • RICHARD from PARADISE, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
16 of 39 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
#2 wire on old control was a tad short to attach to L1 on new control.
Made a short 1/4" female spade to 1/4"male spade jumper wire to solve the issue. Thank you for having a replacement part.
Parts Used:
Dual Element Infinite Control Switch
  • James from SLINGER, WI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!