This part number matches the current model number AH151B
PartSelect #: PS148287
Manufacturer #: AH151B
Manufacturer's Number: AH151B Haloring halogen element with glass-ceramic surface for all Expressions Collection Jenn-Air cooktops. Side plug-in cartridge, also available in white. Works with the foll...
This surface element is for ranges.
The surface element supplies the heat to a cooking area on top of the range.
Unplug the range or shut off the house circuit breaker for the range before insta...
This rivet is an inch and a half long. It is used for many washing machines, microwaves, refrigerators, dryers, and ranges. Use of this rivet requires a rivet tool.
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jen
December 10, 2019
You have the halogen cooktop cartridge listed as not available. This jenn air is 3 yrs old, how can it be not available?
For model number AH151B
Hello Jen, thank you for your question. The manufacturer no longer makes this part, so we are unable to access it from them. However, a replacement that should work is PartSelect Number PS9491817. I hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Remove plug in unit from stove top. Turn over and remove the 7 screws from the 4 sides only. Turn back over holding unit together manually. Remove the glass top gently and lay it aside. Remove two wires that are plugged into the old unit, remembering which belongs where. You might want to remove one at a time and connect to new unit. Place new unit in between the three guides. Make sure the other unit is aligned also. Place glass top back unto unit and replace the 7 screws. Put unit back into stove top and test. Finished in less than 15 minutes with no issues.
