Models
>
AGQ12AJG1
AGQ12AJG1 Air Conditioner - Overview
Models starting with AGQ12AJG1
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
FAN,AXIAL
PartSelect #: PS12747824
Manufacturer #: 5900A10009E
The condenser fan blade fits onto the air conditioner motor shaft. The fan blade helps circulate air over the condenser to cool the refrigerant before it enters in to the evaporator. This part is beig...
$80.13
In Stock
Frame Guide - Black
PartSelect #: PS274402
Manufacturer #: WJ05X10024
This part attaches to the curtain to help hold it in place.
No Longer Available
FAN BLADE
PartSelect #: PS962192
Manufacturer #: WJ73X10087
This part attaches to the motor to help circulate the air.
No Longer Available
Common Symptoms of models starting with AGQ12AJG1
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Broken fan axial blade
Unscrewed the unit from the exterior case pulled out the unit unscrewed the 4 screw that hold the fan shroud carefully unscrewed the coil pulled back unclipped the axial fan clip gentlyhit with rubber mallet replacement of new fan replaced clip
15 minutes best investment of 20 bucks as apposed to 400 $
15 minutes best investment of 20 bucks as apposed to 400 $
Parts Used:
-
John from HARLINGEN, TX
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
6 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
window a/x unit fan broke
took apart the fan housing and replaced the fan saving me hundreds of dollars from buying a new unit
Parts Used:
-
margaret from CARRIERE, MS
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers
6 of 14 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Motor mount broke due to imbalance caused by mud dobber nests.
Pulled PTAC out of wall sleeve, unhook wire harness from control area, remove condenser shroud and motor and fan blade all at the same time. Replaced motor bracket and re-installed in reverse order.
Parts Used:
-
Travis from LOUISVILLE, IL
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!