This manufacturer-approved Refrigerator Pantry End Cap Kit, also known as the Refrigerator Drawer Support, is a kit containing all parts of the Pantry End Cap. It snaps into place on the appliance’s ...
This water filter purifies water going to the water dispenser and sometimes the icemaker as well. This part should be replaced if it is causing reduced water flow or just replaced periodically per the...
This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are mos...
This OEM Center Rail is a white plastic part which supports the crisper frame, which holds the crisper. Fifteen inches long and white in colour, if broken, the support may no longer hold properly. Re...
This includes both the run capacitor and the start relay. The capacitor helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.
The start ...
This light switch may also be known as a refrigerator door switch or a light switch kit, and is compatible with your refrigerator. The function of the refrigerator door switch is to turn on the light ...
This is a replacement pivot block for your refrigerator. It is made of white plastic and is approximately 4 inches long and 1 inch wide. The pivot block catches and holds the door mullion cover when y...
$14.15
In Stock
Questions And Answers for AFI2538AES
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Harold
January 14, 2020
I have replaced the ice maker and water inlet valve and still have no power to ice maker..i tried the jumper thing and still no movement from the motor ...i'm stuck
For model number AFI2538AES
Hi Harold, thank you for your question. If you are still not getting any power to your ice maker you may actually have to take a look at your wiring and your electronic control board for potentially being the issue. It sounds like that might be the case for you. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ted
October 5, 2022
Can you get the front cover of the ice maker that directs the ice to the ice dispenser
For model number AFI2538AES
Hey Ted, thank you for your inquiry. We have researched your model and found that the Cover does not come separately, you may need to replace the whole Ice Bucket and Auger Assembly, part number PS11752873. We hope this helps! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
will not dispense ice or water, makes ice and indicator light on switches come on.
For model number AFI2538AES
Hello Steve, thank you for reaching out. A clogged water filter can cause a refrigerator not to dispense water or ice. We would recommend checking it, the part number is PS11722130. If that does not take care of the issue, we would suggest checking the dispenser solenoid, part number PS2069887. Please reach out to customer service if you need help placing an order, anyone will be happy to assist you. We hope that helps.
frost builds up until reduced cooling and no ice. defrost cools for a short time. same problem. are all auto defrost controls on same circuit board?will replacing board fix problem?
For model number AFI2538AES
Hello Joseph, thank you for contacting us. Before replacing the board, we recommend checking the defrost thermostat, part number PS11743689. It controls the heat cycle that is necessary for defrosting. If this does not help, the issue is probably related to the control board, part number PS11752535. It manages many functions of the refrigerator, such as defrosting times. Replacing the board is the most viable solution to the problem. Customer service is available seven days a week if you require assistance placing an order. Thanks again for reaching out!
Pressed in the end of the filter cover, lowered it down part way. Twisted the old filter 1/4 turn and removed it. Set in the sink to drain. Inserted new filter and twisted it to lock. closed cover. Done. Total time @ 1 Minute.
Removed the fruit & veggie drawers & the deli (pantry) drawer. Took out the 3 screws, removed the attached parts, put them on the replacement part, reattached it and put the drawers back in.
Here's the part I want to share: PartSelect had a expanded diagram showing the correct part and sufficiently detailed to figure out the repair before the part arrived. That's why I ordered from them. Secondly, I ordered the part Thursday morning--and the thing was sitting on my porch when I came back in from my evening out Saturday--2 days later!!!
Remove food off of lower shelf, remove the two produce drawers, remove large lower drawer, remove glass shelf, remove three screws holding end cap in place. Once end cap was removed the drawer track could be removed and placed on new end cap. Installation of new end cap took less than 5 minutes. Most of the time spent was removing/replacing food and cleaning the shelf/bins. PartSelect was awesome BTW!
.gif "SUPPLEMENTAL INFORMATION Diagram and Parts List for Amana Refrigerator")
