AER5630BAB0 Amana Range - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Light Bulb - 40W – Part Number: 8009
$26.41
In Stock
Light Bulb - 40W
★★★★★
★★★★★
(47)
Part #8009
This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are most often used to light the inside of refrigerators and ranges. It features a standard socket base, which means you simply unscrew the burnt-out bulb and screw in the replacement. Depending on the appliance you may require a screwdriver or nut driver to access the light bulb. We recommend you wear work gloves while handling this replacement part. It is constructed of glass and metal and is sold individually. Depending on the appliance and location of the bulb within it, you may want to consider disconnecting power and using a flashlight for easier access to unscrewing and re-screwing in your bulb during this repair.
Touch-Up Paint - White – Part Number: 72017
No Longer Available
Touch-Up Paint - White
★★★★★
★★★★★
(23)
Part #72017
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, and freezers. This is a genuine OEM part and includes a brush applicator. Please remember to wear gloves to protect your hands when applying this paint.
Oven Sensor – Part Number: WPW10181986
$112.60
In Stock
Oven Sensor
★★★★★
★★★★★
(52)
Part #WPW10181986
This temperature sensor detects the temperature within the oven cavity. This oven temperature sensor, for ranges, works together with the oven control board to measure and regulate the oven temperature. The sensor detects the temperature in the oven cavity. If the following symptoms occur, replacing the temperature sensor could be the solution: Little or no heat when baking, oven not heating evenly, oven will not start, and/or oven is overheating. Often, if the sensor is defective, the oven temperature will fluctuate and be inaccurate by more than 50 degrees. The tool needed for this replacement is a #2 square head screwdriver or a #2 Philips screwdriver. Remember to unplug the range before installing the part.
Element with Limiter 6 Inch - 1200W – Part Number: W10823711
$231.78
In Stock
Element with Limiter 6 Inch - 1200W
★★★★★
★★★★★
(40)
Part #W10823711
This 6-inch, 1200-watt radiant surface heating element is a genuine replacement part designed for select ranges. It supplies consistent heat to the designated cooking zone on the stovetop, ensuring even heat distribution for reliable cooking performance. Compatible with Whirlpool, KitchenAid, and other associated brands, this OEM component replaces faulty elements that no longer heat or heat unevenly. Installation should be performed with the appliance unplugged or the circuit breaker turned off. Protective gloves are recommended to avoid injury. Replacing a worn or malfunctioning element helps restore full functionality and cooking efficiency to your range.
Dual Element Control Switch – Part Number: WPW10434452
$125.97
In Stock
Dual Element Control Switch
★★★★★
★★★★★
(59)
Part #WPW10434452
If your range’s burner isn’t heating properly or the temperature seems off, this dual element control switch could be the fix. It’s designed to manage heat for dual surface elements and fits a variety of models from Whirlpool and related brands. Whether your burner won’t start or heats unevenly, this part helps restore smooth operation. Just make sure to check your model number before ordering—it’s not a one-size-fits-all part.
Oven Bake Element – Part Number: WPW10308477
$74.64
In Stock
Oven Bake Element
★★★★★
★★★★★
(40)
Part #WPW10308477
This Whirlpool OEM 2400-watt bake element has push-on terminals and is located on the bottom of the oven cavity. The bake element supplies heat while baking. If the oven is not heating properly the bake element may have burned out. If the element has burned out there would be visible damage such as holes, cracks, or blisters. When replacing the element, do not allow the wires to fall back through the rear of the oven. Disconnect the power to the range before starting your repair.
Range Safety Thermostat – Part Number: WP3196548
$48.47
In Stock
Range Safety Thermostat
★★★★★
★★★★★
(12)
Part #WP3196548
This part is used as a safety feature. If your range overheats this part will shut the range down.
Burner Element - Right Front – Part Number: W10823698
$254.07
In Stock
Burner Element - Right Front
★★★★★
★★★★★
(11)
Part #W10823698
This surface element is for ranges. The surface element supplies the heat to a cooking area on top of the range. Unplug the range or shut off the house circuit breaker for the range before installing this part. Wear work gloves to protect your hands.
Door Hinge - Active With Spring – Part Number: WPW10299224
$81.98
In Stock
Door Hinge - Active With Spring
★★★★★
★★★★★
(38)
Part #WPW10299224
This is a door hinge active with spring, for your range. The hinge controls the opening and closing of the oven door. If your oven door seems to be sticking, you may want to consider replacing this part. We recommend replacing both hinges at the same time. This model is roughly 9.5 inches long, f4 inches wide, and almost 1inch thick.
Screw – Part Number: W11233072
$30.40
In Stock
Screw
★★★★★
★★★★★
(5)
Part #W11233072
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch. It has 6 threads. Refer to the manual provided by the manufacturer for further information on repair and accurate guidance. Remember to wear work gloves as a safety precaution.
Range Insulation – Part Number: WPW10208653
$69.24
In Stock
Range Insulation
★★★★★
★★★★★
(9)
Part #WPW10208653
Oven Wrap Insulation.
SOCKT-LITE – Part Number: W11594027
$97.21
In Stock
SOCKT-LITE
★★★★★
★★★★★
(15)
Part #W11594027
The light socket on your electric range connects the power source to the light bulb. If your oven light is malfunctioning, you may need to replace the light socket. The light socket is located in the back of your range, so in order to access it you will need to remove the back panel. Many of our customers have rated this repair as easy, and it should take less than 15 minutes. Before you begin this repair, make sure to disconnect the power source from your range. This is an OEM part sourced directly from the manufacturer.

Questions And Answers for AER5630BAB0

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Teresa - For model number AER5630BAB0
February 22, 2024
My back right burner only works on 7 or higher
Chris Boyle Profile
Hi Teresa, thank you for reaching out. Based on the description that you have provided, we would recommend checking the infinite switch, part number PS11740775, to solve the problem. We hope that helps!
$72.74
In Stock
Infinite Switch - 8 Inch
1 person found this instruction helpful.
Was this helpful?
Thank you for voting!
Tony - For model number AER5630BAB0
February 14, 2025
My 8" stove element turns on but when heat is reached it stays on and continues getting hotter and hotter
Chris Boyle Profile
Hello Tony, thank you for your inquiry. The symptoms you describe alert on a faulty Surface Burner Switch 8 Inch PS11740775. We hope this helps.
$72.74
In Stock
Infinite Switch - 8 Inch
1 person found this instruction helpful.
Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the AER5630BAB0

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Right rear burner went bad
155 of 190 people found this instruction helpful.
  • Mark from Loxahatchee, FL
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Turned the breaker off, I removed 2 screws securing the range top to the range, opened the top and secured it in the up position, Removed the 2 screws securing the element ,one at a time I swapped the quick connectors from the old element to the new and repeated the process in reverse. I save over $100.00 in labor, plus most companies get you for a trip charge. It was easy!!
Was this helpful?
Thank you for voting!
heating element burnt up
108 of 124 people found this instruction helpful.
  • Esther from San Antonio, TX
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
first I pulled the stove from the wall. Then unplugged the stove from the wall (electric stove) for safety. then I removed the middle back panel screws(2) and then the panel. I then pulled the wires off the heating element that was bad. I took the screws (2) off the heating element inside the oven. I had to use WD-40 to loosen the sc rews because with the heat they were really stuck. I removed the heating element and replaced it with the one I got through partselect.com. Put everything back and walla finished. Partselect.com sent me the right part at the right price and fast. No hassles at all.
Was this helpful?
Thank you for voting!
mice had made nests in the insulation wrap in the range
129 of 211 people found this instruction helpful.
  • Wendy from Red Hook, NY
  • Easy
  • More than 2 hours
  • Screw drivers
I numbered every part. ex: 1 L., for first part removed left side. I used a magic marker to circle the holes and wrote the number of screws used on the part, set the srews in a separete place, so that I new where these screws went to. The cleanup was pretty time consuming, but I was able to keep my stove, when every repairman I called to fix my stove told me I was better off buying a new stove. ($600.00 stove 2 years old)Please Note: The insulation blanket needed for the entire stove is two pieces, the sides and top are one part # and the bottom and back, are another part #. I did not know this. I just purchased the top and sides. I got lucky, the back and bottom were still in good shape. So I guess I should have read the description of the part more carefully to see what it covers, before I ordered it. It took two people two hours to do the work, it was really nice to have an extra set of eyes, to remember what direction pieces of metal from the stove went. I would do it all over in a heart beat instead of buying a new stove.
Was this helpful?
Thank you for voting!