This thermal cut-off kit for a dryer includes one high limit thermostat with a limit of 250 degrees Fahrenheit, and one thermal cut-off fuse (309 degrees). This kit also includes flat heaters with jumper wires.
If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found both on the idler pul...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This high-limit thermostat with Terminal Extension Arm acts as as safety mechanism that keeps the dryer from overheating. Once the dryer temperature reaches 221 degrees Fahrenheit, this piece will shu...
The blower wheel is a squirrel cage type wheel whose purpose is to move the air through the room or appliance. The blower wheel spins on the motor shaft to blow air through the dryer drum and out through the exhaust.
This kit is used for electric clothes dryers, and it comes with a yellow wire nut.
$6.99
In Stock
Questions And Answers for AED4475TQ0
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Caylin
December 10, 2019
My dryer is tumbling but it is not heating up. What should i do first.
For model number AED4475TQ0
Hello Caylin and thanks for writing.
A clogged dryer vent is one of the leading causes for a dyer not heating properly. Lint builds up over time and obstructs the airflow. ... The first thing to check when your dryer won't heat is the dryer vent duct. We hope this helps. Please contact us anytime.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Carlos
October 20, 2023
Hello,
The pulley on my model broke and I replaced it along with the belt as it was old. Without the drum moves well but when I put wet clothes in it it moves super slow. Any thought in why that may be? do i need to tighten the pulley more to the motor or something else?
Thank you,
Carlos
For model number AED4475TQ0
Hi Carlos, thank you for your inquiry. We would recommend checking the drive motor, part number PS334304. We hope this helps.
Dryer makes loud rubbing noise only when starting then it goes away.
For model number AED4475TQ0
Hi Rita, thank you for getting in touch. Based on our understanding of the issue, we would suggest replacing the drive belt, part number PS346995, to solve the problem. Glad to be of help!
The tensioner was displaced, any diagrams on how to reset it to it's location ? Or better yet, where on to motor or beside the is it located and how does you install it?
For model number AED4475TQ0
Hello Derle, thank you for asking. We have on our site a video for a similar video that should be of some help. Good luck with this repair.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
First tried heating element and thermal fuse with no luck. Ordered thermal cutoff and fixed problem. Had I used an ohm meter first I would have determined problem before having ordered heating element and fuse, as both had resistance. I wast just lazy and ordered the took the most common failed components first before taking dryer back off.
Pryed dryer top open and opened front door. . Unscrewed the 2 retaining screws. Pulled old switch from the wiring harness. Put new switch in place and replaced the retaining screws. Put new switch wire plug into the wiring harness. Before closing top, checked door switch function with dryer on. Dryer cut off when door open and when closed dryer started normally. . . Maint. Note instruction book should warn that letting door slam, which I did on occaision, broke the switch arm. Might save future problems.
