AD50USS2 Whirlpool Dehumidifier - Overview
Diagrams for AD50USS2
See every part. Know exactly what you need.
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Wheel, Blower
Part #1188416
Washer Screw 818 X 1/2
Part #WP9740848
Caster
Part #1188415
SCREW
Part #W10850046
Filter
Part #WP1188402
Access Valve - 5/16 Inch
Part #978026
Capacitor
Part #WP1188476
Fan Motor
Part #1188411
This part is used to circulate the fan that draws the room air over the coils.
Switch, Bucket Fill/Check
Part #1188815
VALVE
Part #978030
Access Valve - 1/2"
Part #978028
Manuals & Care Guides for AD50USS2
Click to downloadQuestions And Answers for AD50USS2
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
- Prev
- 1
- Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Trina
- For model number AD50USS2
January 3, 2020
Do we add water in bucket
Hi Trina, no you just have to empty it. Thank you for your question and good luck with your repair!
1 person
found this instruction helpful.
Was this helpful?
Thank you for voting!
Lee
- For model number AD50USS2
June 15, 2024
H2O will not go to drain hose And fills bucket. All gravity drain lines are open and unrestricted.
Hi Lee, thank you for the question. Ensure that the hose is properly installed and has a good connection. If the connection is loose, gently tighten the connection. Make sure not to push the hose too far into a drain, such as a standpipe, and if the hose comes into contact with water, it will not drain either. Pull out the hose until the hose outlet is above the waterline. Cut off any excess hose so that it is moving in a straight line to the drain. Avoid using an old or damaged hose. We hope this information helps!
1 person
found this instruction helpful.
Was this helpful?
Thank you for voting!
Weldon
- For model number AD50USS2
November 4, 2022
do not collect water; the fan runs ok
Hello Weldon, thank you for contacting us. Sometimes due to a clogged and damaged filter, such a problem arises. We would recommend replacing the filter, part number PS11738449. Also, inspect the valves and clean them. If the valve, part number PS11747411, is damaged, we would recommend replacing it. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
Was this helpful?
Thank you for voting!
- Prev
- 1
- Next
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More