ACM2160AW (AMWEAMA) LG Wall Oven - Overview

Diagrams for ACM2160AW

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Time Delay Fuse – Part Number: 3B74133Q
$13.15
In Stock
Spring – Part Number: 4970WRA001G
$13.15
In Stock
Spring
★★★★★
★★★★★
(1)
Part #4970WRA001G
This spring provides tension or controlled movement within the appliance mechanism. Engineered for durability, it supports smooth operation and helps maintain proper alignment of connected components.
Microwave Micro Switch – Part Number: 6600W1K001C
$20.85
On Order
Microwave Micro Switch
Part #6600W1K001C
Rivet – Part Number: 4051W3A001A
$11.95
In Stock
Rivet
Part #4051W3A001A
Magnetron – Part Number: 6324W1A001L
$120.07
In Stock
Magnetron
Part #6324W1A001L
Micro Switch – Part Number: 6600W1K001D
$24.15
In Stock
Microwave Lever – Part Number: 4510W3L003A
$16.45
In Stock
Microwave Lever
Part #4510W3L003A
TRAY,GLASS – Part Number: 3390W1G009D
$72.55
In Stock
TRAY,GLASS
Part #3390W1G009D
This glass tray provides a stable, heat-resistant surface for cooking or heating while allowing even energy distribution. It is replaced when chipped, cracked, or missing to restore safe operation.
Motor Synchronous – Part Number: 6549W1S011B
$46.15
On Order
Motor Synchronous
Part #6549W1S011B
High Voltage Diode – Part Number: 6021W3B001V
$21.95
In Stock
High Voltage Diode
Part #6021W3B001V
HOLDER ASSEMBLY,LOCKER – Part Number: 3501W1A053A
$57.15
Special Order
HOLDER ASSEMBLY,LOCKER
Part #3501W1A053A
Capacitor – Part Number: 0CZZW1H004B
$60.45
On Order
Capacitor
Part #0CZZW1H004B

Common Symptoms of the ACM2160AW

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Microwave would not rotate or heat up food.
52 of 77 people found this instruction helpful.
  • Joshua from WHITE LAKE, MI
  • Very Easy
  • 15 - 30 mins
  • Screw drivers
After watching a few youtube videos, I used a phillips SD to take controll pannel off to access the switches that sense when microwave door is closed. Swapped out all 3 switched and mocrowave works like new. $20 fix (shipping included)
Was this helpful?
Thank you for voting!
Motor Burned Out On Turntable
37 of 49 people found this instruction helpful.
  • Steven from Oak Forest, IL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
My 8 year old daughter cleaned the inside of the microwave with enough water to rival a tsunami. Resulted in a clean microwave with a fried out motor that no longer revolved. Part came quickly. Took cover and bottom off to get to the part. One screw held it on and a plug. Removed those, put on new part and she was good to go. No tri p to home depot today.
Was this helpful?
Thank you for voting!
Broken door micro switch. (unit does not start heating)
37 of 68 people found this instruction helpful.
  • JAMES from BILLINGS, MT
  • Very Easy
  • 30 - 60 mins
  • Screw drivers
Unplug the unit before servicing. Need phillips screwdriver. Open door. Use step ladder to access and remove 2 small screws from top of the room air diffuser at top of unit. Slide diffuser slightly to the left to align the diffuser's plastic tab on the left side to rotate toward you. (The wires for the front control panel are at the far l eft side of this difuser, but difuser is slotted for easy removal). Once the difuser is removed you will see 1 screw at the top that secures the pannel cover on the left side of the unit. Remove screw and slide this panel slightly up and out. This exposes the plastic frame that holds the upper and lower door switches. To locate the door switches and observe how they work, close and open the door and watch the door (bayonets) open and close the micro switches. Do the (red) buttons on top of the switches move up and down when the door bayonets push and release? If the buttons do not "pop" up when opened the switch is defective. The switch frame is secured with 2 screws. Remove screws and rotate the unit out for easy access to the micro switch(s). The internal (spring?) on my unit that is suposed to allow the red (visible) button on top of the switch to "pop" up when the door is opened was broken. Carefully pry the switch outward while being careful to lift the plastic holder-piece that holds the switch in place. Be careful, there is a small pin on the frame, so rotate the switch OUT toward you while lifting (carefully) the plastic holder-piece (you will see it on top of the switch). You can use an ohm meter to test the continuity of the switches. But if the buttons don't "pop" they are defective. Replace switch and reassemble.
Was this helpful?
Thank you for voting!